                        ===========================
                        R E L E A S E    N O T E S
                        ===========================

                       Broadcom Windows Installer Projects
          For Windows NT 4.0, Windows 2000, XP 32/64 bit, Vista 32/64 bit

                Copyright (c) 2002-2007 Broadcom Corporation
                            All rights reserved.
                             January 08, 2007


Version 2.10.24 (May 31, 2007)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00029747 )
                 Improper text appears for 4401 Installer using Dutch.
                 
      Cause:
                 Dutch was not properly translated for 4401 Driver Installer

      Files:
                 4401 Driver Installer localization
                
      Change:    
                 Default English text is shown in place of improper text.


Version 2.10.23 (May 25, 2007)
--------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00029239 )
                 IBM requies driver installer to be able to down-level 
                 the NDIS driver(s)
       Impact:
                 NetXtreme I and II driver installers. These changes assume
                 that the older drivers to be downgraded are forward 
                 compatible with the newer drivers.
   Fixes:
   ===========
   1. Problem:   
                 NetXtreme I driver installer causes a popup during silent
                 installation
      Cause:
                 Did not handle the silent installation popup properly
      Files:     
                 NetXtreme I driver installer                                
      Change:
                 Added UI check level to properly display popup during
                 UI/silent installations

Version 2.10.22 (May 15, 2007)
--------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00029451 )
                 Remove the "Upgrade" button on the License tab 
                 in BACS for NX2
       Impact:
                 Umbrella Installer

Version 2.10.21 (May 2, 2007)
--------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00029361 )
                 Added Bpowmon to an OEM Management Installer
       Impact:
                 Management Installer

Version 2.10.20 April 30, 2007)
----------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00025927 )
                 Added OEM support info for a NetExtreme II Installer
       Impact:
                 NetXtreme II Driver Installer

   Fixes:
   ===========
   1. Problem:   ( Cont00029283 )
                 Management installer does not upgrade ASF 32 bit on 
                 x64 platforms
      Cause:
                 ASF 32 bit upgrade scenario was not properly handled.

      Files:     Management Installer
                                
      Change:
                 Management installer properly upgrades from ASF 32 bit on
                 x64 platforms
                 
   2. Problem:   ( Cont00029227 )
                 No BACS icon in system tray after installation
                 of BACS.
      Cause:
                 Improper value set for all users.

      Files:
                 Management Installer
                
      Change:    
                 Set all users to proper value.

   3. Problem:   ( Cont00029294 )
                 When running installer using AT command-line task scheduler, 
                 not all components get installed.
      Cause:
                 Improper value set for all users.

      Files:
                 Management Installer
                
      Change:    
                 Set all users to proper value.

Version 2.10.19 (April 18, 2007)
--------------------------------
   Fixes:
   ===========
   1. Problem:   
                 Installing driver on Windows Vista on user under "Administrator"
                 privilege failed
      Cause:
                 The manifest file for installer was set to the wrong privilege
      Files:
                 NetXtreme I driver Installer modules
      Change:    
                 Changed the manifest file to the appropriate setup
      Impact:
                 NetXtreme I Driver Installer

Version 2.10.18 (April 12, 2007)
--------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00029036 )
                 Added support for NetXtreme II driver installer in
                 iSCSI boot environment
       Impact:
                 NetXtreme II Driver Installer

Version 2.10.17 (April 10, 2007)
--------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00029051 )
                 Integrated Management Installer with ASF
       Impact:
                 Management Installer

Version 2.10.16 (March 26, 2007)
--------------------------------
   Enhancement:
   ===========
   1.  Change:   
                 Added support for NetExtreme II for Windows Vista
       Impact:
                 5706 Driver Installer
   Fixes:
   ===========
   1. Problem:   ( Cont00028462 )
                 BACS Installer leaves an empty folder in 'Program Files (x86)' for x64.
                 
      Cause:
                 Unneeded Components were present

      Files:
                 BACS Management Installer
                
      Change:    
                 Removed unneeded components

Version 2.10.15 (February 22, 2007)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00028469 )
                 Improper text appears during installer in Vista (Swedish). 
                 
      Cause:
                 Swedish was not properly translated for 4401 Driver Installer

      Files:
                 4401 Driver Installer localization
                
      Change:    
                 Default English text is shown in place of improper text.

Version 2.10.14 (February 16, 2007)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00028517 )
                 Umbrella Installer needs to include additional DLL 
                 files that go with the VBD driver
      Cause:
                 Latest driver and umbrella installer did not have the
                 newly added DLLs

      Files:
                 NetXtreme II and Umbrealla Installers
                
      Change:    
                 Added the additional driver files to the installer package

Version 2.10.13 (January 30, 2007)
----------------------------------
   Enhancement:
   ===========
   1.  Change:   
                 Added support for ASF Configuration for AMD64 platform
       Impact:
                 ASF Installer

Version 2.10.12 (January 15, 2007)
----------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00028109 )
                 Add WinXP 32/x64 to the supported OS for Teton 
                 DrvInstaller
       Impact:
                 NetXtreme II Driver Installer

Version 2.10.11 (January 12, 2007)
----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00028127 )
                 W2K364 - Umbrella installer only writes UInstallerVersion 
                 to the 64bit reg
      Cause:
                 When updating the installer project into the newer build,
                 this registry entry was accidentally removed.

      Files:
                 Umbrella Installer database
                
      Change:    
                 Added 32 bit registry entry when running umbrella installer 
                 on 64 bit target system

Version 2.10.10 (January 11, 2007)
----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00028061 )
                 Umbrealla Installer v10.15.01 does not remove all 
                 folders after a silent uninstall in W2K3 x64 - no SNP
      Cause:
                 This is because of the side effect introduced on the
                 fix for Cont00027870. 

      Files:
                 FixForUpgrade.exe
                
      Change:    
                 Changed the T2.6 Umbrella installer during major upgrade 
                 to not remove 5706 during major upgrade by changing the
                 target parameter instead of the condition

Version 2.10.9 (January 08, 2007)
----------------------------------
   Fixes:
   ===========
   1. Problem:   
                 The application description display for the 
                 management installer was displayed untranslated
                 for all languages. 
      Cause:
                 The description string was not translated up until
                 now.

      Files:
                 BMgmtInstaller.ism
                
      Change:    
                 Translated the strings for all the languages.
                 
   2. Problem:   
                 The hotkey in the Dutch language for the "back"
                 button was not unique.
      Cause:
                 There was a clash in the accelerator hotkey 
                 between the back and next button.

      Files:
                 BMgmtInstaller.ism
                
      Change:    
                 Picked a different accelerator hotkey for the
                 back button.                 
                 
                 
Version 2.10.8 (December 29, 2006)
----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00027870 )
                 SLB Team Serving as NLB Cluster Adapter Loses All 
                 Members During Driver Upgrade
      Cause:
                 When doing major upgrades, the older installer in
                 question (the version mentioned in the bug report)
                 accidentally uninstalls the NDIS VBD client. This
                 changes the instance id when the major upgrade finishes.

      Files:
                 FixForUpgrade.exe
                
      Change:    
                 Updated FixForUpgrade.exe to detect the scenario and
                 skip uninstallting the NDIS VBD client during the 
                 scenario mentioned in the bug.
                 
   2. Problem:   ( Cont00027883 )
                 4401 Driver Installer - Improper Publisher Name 
                 appears in Programs and Features for Vista (German)
      Cause:
                 The company name is displayed with wrong translated
                 string.

      Files:
                 BDrvInst44.ism.
                
      Change:    
                 To fix this, I changed the string table to display 
                 un-translated company name in English. 
                 This is how our NetXtreme installer does           
                 
                 
Version 2.10.7 (December 28, 2006)
----------------------------------
   Fixes:
   ===========
   1. Problem:   ( CQ27966 )
                 Silent Install by Feature on IA64 and IA32 Platforms 
                 appears installed but does not install components.
      Cause:
                 The feature hierarchy was not setup right in the 
                 setup design.

      Files:
                 BMgmtInstaller.ism
                
      Change:    
                 Renamed the parent and children feature names in the 
                 setup design and setup the hierarchy correctly. Also
                 set the "required" field on all the features appropriately.
                 
                 
Version 2.10.6 (December 21, 2006)
----------------------------------
   Enhancement:
   ===========
   1.  Change:   
                 Request to write into registry key hive of the product
                 release version for umbrella installer

       Impact:
                 Umbrella and Management Installer

Version 2.10.5 (December 19, 2006)
----------------------------------
   Enhancement:
   ===========
   1.  Change:   
                 Deleted THA localization from BACS
       Impact:
                 Management Installer

Version 2.10.4 (December 12, 2006)
----------------------------------
   Enhancement:
   ===========
   1.  Change:   
                 Added support for reboot detection using XML file for
                 4401 Driver Installer
       Impact:
                 4401 Driver Installer
   Fixes:
   ===========
   1. Problem:   ( Cont00027491 )
                 Upgrading MgmtApps from 9.4b to 9.7 fails
      Cause:
                 This is because if Rel 8.1 Management Installer installed
                 on the system, the later installer will never prompt for reboot
                 although BASP is installed. Reboot is needed to upgrade
                 BASP.
      Files:
                 Management Installer modules
      Change:    
                 Changed the condition to reboot all the time when BASP exists 
      Impact:
                 Management Installer
   2. Problem:   ( Cont00027826 )
                 BACS and ASF : Short cut link's  right click properties are 
                 different
      Cause:
                 The initial ASFConfig shortcut was only a "dummy" shortcut.
      Files:
                 ASF Installer module
      Change:    
                 Changed the ASFConfig shortcut to have a valid location and path
                 and changed the behavior of the ASFConfig shortcut
      Impact:
                 ASF Installer

Version 2.10.3 (December 7, 2006)
---------------------------------
   Enhancement:
   ===========
   1.  Change:   
                 TPM Driver Installer should only run on Windows XP.
       Impact:
                 TPM Driver Installer
   2.  Change:
                 Added Link and Support Information on TPM Driver Installer
       Impact:
                 TPM Driver Installer

Version 2.10.2 (November 22, 2006)
-----------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00024378 )
                 Running the setup with the "/a" option doesn't require a path
       Impact:
                 Umbrella Installer
   Fixes:
   ===========
   1. Problem:   ( Cont00027604 )
                 ASF Installer: Cancel installation prompt pops up 
                 when clicking on the "Next" button
      Cause:
                 The condition to advance to the installation was wrong.
      Files:
                 ASF Installer
      Change:    
                 Changed the condition to correctly advance to the
                 installation process
      Impact:
                 ASF Installer
   2. Problem:   ( Cont00027604 )
                 On Vista 64bit, the installation can be completed, but an 
                 ASFconfig folder with the help file is created in the 
                 Program Files (x86) directory. This installer should NOT be 
                 installing any ASFConfig component.
      Cause:
                 The help file was not part of the ASF Config
      Files:
                 ASF Installer
      Change:    
                 Made the help file to be always part of the ASF COnfig
      Impact:
                 ASF Installer

Version 2.10.1 (November 13, 2006)
----------------------------------
   Enhancement:
   ===========
   1.  Change:   ( Cont00014597 )
                 Need umbrella installer to be able to force down grade
       Impact:
                 Umbrella and Management Installer
   Fixes:
   =====
   1. Problem:   ( Cont00026828 )
                 Blank popup message when running umbrella installer silently
      Cause:
                 During downgrade scenario, the custom action to display the
                 popup did not properly conditioned to surpress during
                 downgrade
      Files:
                 Management and Umbrella modules
      Change:    
                 The downgrade capability is disabled unless the
                 users specifically set the switch.
      Impact:
                 Umbrella Installer

Version 2.10.0 (November 3, 2006)
---------------------------------
   Enhancement:
   ===========
   1.  Change:  
                Upgraded all Installers to new Installshield
                Version 12.
       Impact:
                All Installers
   2.  Change:  
                Changed Management Installer Feature hierarchies
                to be consistent with the other Installers
       Impact:
                Management Installer

Version 1.10.9 (May 31, 2007)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00029747 )
                 Improper text appears for 4401 Installer using Dutch.
                 
      Cause:
                 Dutch was not properly translated for 4401 Driver Installer

      Files:
                 4401 Driver Installer localization
                
      Change:    
                 Default English text is shown in place of improper text.

Version 1.10.8 (February 22, 2007)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00028469 )
                 Improper text appears during installer in Vista (Swedish). 
                 
      Cause:
                 Swedish was not properly translated for 4401 Driver Installer

      Files:
                 4401 Driver Installer localization
                
      Change:    
                 Default English text is shown in place of improper text.

Version 1.10.7 (December 29, 2006)
----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00027883 )
                 4401 Driver Installer - Improper Publisher Name 
                 appears in Programs and Features for Vista (German)
      Cause:
                 The company name is displayed with wrong translated
                 string.

      Files:
                 BDrvInst44.ism.
                
      Change:    
                 To fix this, I changed the string table to display 
                 un-translated company name in English. 
                 This is how our NetXtreme installer does  
                 
                 
Version 1.10.6 (December 12, 2006)
----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00027826 )
                 BACS and ASF : Short cut link's  right click properties are 
                 different
      Cause:
                 The initial ASFConfig shortcut was only a "dummy" shortcut.
      Files:
                 ASF Installer module
      Change:    
                 Changed the ASFConfig shortcut to have a valid location and path
                 and changed the behavior of the ASFConfig shortcut
      Impact:
                 ASF Installer

Version 1.10.5 (November 22, 2006)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00027604 )
                 ASF Installer: Cancel installation prompt pops up 
                 when clicking on the "Next" button
      Cause:
                 The condition to advance to the installation was wrong.
      Files:
                 ASF Installer
      Change:    
                 Changed the condition to correctly advance to the
                 installation process
      Impact:
                 ASF Installer
   2. Problem:   ( Cont00027604 )
                 On Vista 64bit, the installation can be completed, but an 
                 ASFconfig folder with the help file is created in the 
                 Program Files (x86) directory. This installer should NOT be 
                 installing any ASFConfig component.
      Cause:
                 The help file was not part of the ASF Config
      Files:
                 ASF Installer
      Change:    
                 Made the help file to be always part of the ASF COnfig
      Impact:
                 ASF Installer

Version 1.10.4 (October 24, 2006)
-----------------------------------
   Enhancement:
   ===========
   1.  Change:  ( Cont00026995 )
                ASF IP Monitor does not work for Vista x64 system.
       Impact:
                ASF Installer
   2.  Change:  ( Cont00027096 )
                Add BACS and BACS Installer support for Windows 
                Vista 64bits (AMD64) for Lenovo MB  
       Impact:  
                Management Installer
   3.  Change: 
                Changed the NICCheck API behavior
       Impact:
                All drivers and umbrella installers

   Fixes:
   ===========
   1. Problem:   ( Cont00027113 )
                 Umbrella Installer removes teton/legacy driver folders 
                 when bacs/basp, snmp, cim are selected for removal
      Cause:
                 A side effect from the fix done in Cont00026233 and 
                 Cont00026432. 
      Files:
                 Management Installer modules and Umbrella Installer
      Change:    
                 Changed the feature hierarchy in umbrella installer to
                 make sure that drivers are installed by default and
                 de-selectable
      Impact:
                 Management and Umbrella Installer

Version 1.10.3 (October 11, 2006)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00027095 )
                 Silent Install from BRCM Umb Installer to BRCM Drv 
                 Installer v10.01.01 Results in a Pop Up Message-W2K3x64
      Cause:
                 The condition check for popup message did not include
                 the scenario when running silent installation
      Files:
                 NetXtreme II x64 driver installer modules
      Change:    
                 Changed the popup display error message to handle 
                 silent installation scenario
      Impact:
                 NetXtreme II driver installer and Umbrella Installer

Version 1.10.2 (October 4, 2006)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   
                 The installation failed when NICChecek property is 
                 turned on Windows Vista.
      Cause:
                 The NICCheck always checks against the NDIS5.1 
                 INF file which recently has a Vista entry inside the
                 Vista that causes the NICCheck not checking the correct
                 Hardware ID
      Files:
                 NetXtreme I driver installer modules
      Change:    
                 Add a new functionality to check against the NDIS6 INF
                 file in the case of Windows Vista
      Impact:
                 NetXtreme I driver installer

Version 1.10.1 (October 4, 2006)
-----------------------------------
   Enhancement:
   ===========
   1.  Change:  
                Changed the INF File name for NDIS 5.1 driver that gets
                installed in Vista to be unified with the older Windows
                INF file name
       Impact:
                NetXtreme I driver and umbrella installer

Version 1.10.0 (October 2, 2006)
-----------------------------------
   Enhancement:
   ===========
   1.  Change:  
                Added a new API to abort installation process when HP's
                NCU package has already existed in the system
       Impact:
                NetXtreme II driver and umbrella installer
   2.  Change:
                Changed the NetXtreme II driver installer abort installer
                when it detects Windows XP using the default MSI popup
                message box instead of our own custom message
       Impact:
                NetXtreme II driver installer

Version 1.2.0 (September 25, 2006)
-----------------------------------
   Enhancement:
   ===========
   1.  Change:  
                Changed 4401 Driver installer into MSM based installer 
                from MSI 
       Impact:
                4401 Driver Installer
   2.  Change:  
                ASF Installer is ready for Vista. ASFConfig (ASF GUI)
                will not get installed on Vista x64 platform
       Impact:
                ASF Installer

   3.  Change:  ( Cont00026774 )
                Uninstalling BACS when tray icon is present will trigger 
                warning message on Vista.
       Impact:
                Management and Umbrella Installer
   4.  Change:  ( Cont00026232 )
                Umbrella installer to install CHM (help) file by default
       Impact:
                Management and Umbrella Installer
   5.  Change:  ( Cont00026665 )
                The Upgrading Error from BRCM Umbrella Installer to BRCM 
                Drv/Mgmt Apps Installer Needs to be User Friendly
       Impact:
                Drivers, Management and Umbrella Installer

Version 1.1.14 (September 15, 2006)
-----------------------------------
   Fixes:
   ===========
   1. Problem:   
                 BACS IA64 shortcut link is not properly set
      Cause:
                 Installer shortcut for BACS IA64 was not set properly
      Files:
                 BACS Module
      Change:    
                 Fixed the shortcut to have the correct link
      Impact:
                 Management Installer

Version 1.1.13 (September 7, 2006)
----------------------------------
   Enhancement:
   ===========
   1.  Change:  
                Management Installer is ready for Vista. On Vista platform 
                installation, BASP will not get installed
       Impact:
                Management Installer

   Fixes:
   ===========
   1. Problem:   ( Cont00026593 )
                 There is a dead link of Broadcom in support information
                 (TW,CH OS)(v9.52.0.0)
      Cause:
                 There are typos on the link for Chinese localization string
      Files:
                 Management Installer
      Change:    
                 Fixed the link type to the correct Broadcom link
      Impact:
                 Management Installer

Version 1.1.12 (August 30, 2006)
---------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00026590 )
                 Silent install of ia32 ASFConfig in x64 Environment Results
                 in Pop-up Message
      Cause:
                 When the installer encounter invalid OS target machine, the 
                 installer will popup a message of "invalid OS" and aborts
                 the installer. The popup message did not handle the silent
                 installation scenario properly. 
      Files:
                 All Installer
      Change:    
                 Add the condition to not popup during silent install
      Impact:
                 All installers

Version 1.1.11 (August 18, 2006)
---------------------------------
   Enhancement:
   ===========
   1.  Change:  ( Cont00026432 )
                Add/Remove Components should not Display Driver Selection for
                Umbrella Installer
       Impact:
                Changed the umbrella installer to not showing Driver selection
                and skip all the driver installations during add/remove components

   Fixes:
   ===========
   1. Problem:   ( Cont00026233 )
                 Silent install of fails when ADDSOURCE used
      Cause:
                 When umbrella installer tried to install BACS component only
                 using the commandline, driver installers custom actions are
                 also being executed but the driver files are not being copied
                 into the directory. Therefore, it made the installer failed
      Files:
                 Umbrella Installer 

      Change:    
                 Add Driver Installer modules on every features
      Impact:
                 Umbrella Installer
   2. Problem:   ( Cont00026409 )
                 T2.8.4 Driver installer silent update results in pop-up message
      Cause:
                 Reboot popup message box showed up during silent installation
                 to remind users to reboot the system after upgrading
      Files:
                 NetXtreme II Merge Modulues
      Change:    
                 Changed popup message to use Windows popup message box for reboot
                 that will lead to automatic reboot during silent installation
      Impact:
                 All installers
   3. Problem:   ( Cont00026166 )
                 Error occurs when launching BACS under non-admin previlage on
                 XP x64
      Cause:     
                 BACS components for 64 bit platform uses advertised shortcut that 
                 resulting the shortcut to be installed using the msi file 
                 when the first BACS shortcut is launched. In non-admin account, 
                 that account tried to find the msi account on the account's default
                 location which resulting the file cannot be found
      Files:      
                 BACS 64 bit Merge Modules 
      Change:
                 Changed the BACS shortcut into non-advertised shortcut and specify
                 the exact location of the application
      Impact:    
                 Management and Umbrella Installer
   4. Problem:   ( Cont00026390 )
                 IA32 ASF Config Installer runs to Completion in Windows XP x64
      Cause:     
                 There is no abort installation feature on the ASF Installer to detect
                 and abort the installation when trying to install at the wrong platform
      Files:     
                 ASF Installer 32bit modules
      Change:    
                 Add a feature to abort installation when wrong OS platform is detected
                 and show up a dialog box with localized strings
      Impact:
                 ASF Installer
   5. Problem:   ( Cont00026148 )
                 BACS Installshield contains English strings in German installer version
      Cause:     
                 The localized strings cannot be put inside the merge modules, it must be
                 in the installer database in order to get localized. 
      Files: 
                 Management and ASF Installers Modules
      Change:
                 Moved all the localized string from the merge modules to the installer
                 database in order for the localized strings to get picked up
      Impact:
                 NetXtreme Driver, ASF and Management installers
   6. Problem:   ( Cont00026444 )
                 BACS installer v9.06.02 upgrade from v9.03.01 results in reboot.
      Cause:     
                 During installer upgrade, the Power Monitor service is using the BMAPI
                 Therefore, the installer cannot replace/update the BMAPI file that
                 forces the installer to prompt for reboot at the end.
      Files:     
                 Management Installers modules
      Change:
                 Stop the Power Monitor service before upgrading and restart it back again
                 when the upgrade is finished. This change will also affect during 
                 uninstallation
      Impact:
                 Management installers

Version 1.1.10 (August 8, 2006)
---------------------------------
   Enhancement:
   ===========
   1.  Change:
                 When installing both Umbrella and NetXtreme II driver
                 installer on Windows XP platform, the installation will
                 be aborted in the case of NetXtreme II installer and
                 NetXtreme II related installation will be skipped on
                 umbrella installer
       Impact:
                 Umbrella and NetXtreme II Driver Installer

   Fixes:
   ===========
   1. Problem:   ( Cont00025871 )
                 Cancelling Mgmt Apps Uninstallation Toward the  
                 End Will Cause Error if Uninstallation/Reinstallation 
                 Attempted Subsequently 
      Cause:
                 The Cancel button is not disabled in the Setup  
                 Progress dialog if initiated from Control Panel's
                 Add/Remove Program. Cancelling during install /
                 upgrade / uninstall is not supported.
      Files:
                 All Installer files
      Change:    
                 Hide cancel button
      Impact:
                 All installers.
   2. Problem:   ( Cont00026086 )
                 Running Sequential Silent Install of Umbrella Installer Leaves 
                 L2 Driver in Disabled State
      Cause:
                 During silent install, the popup message box that shows the system
                 need to be rebooted did not show up because the box was using
                 our BRCM made popup box
      Files:
                 Umbrella, NetXtreme, NetXtreme II, and TPM Driver Installer
      Change:    
                 Changed popup message to use Windows popup message box for reboot
                 that will lead to automatic reboot during silent installation
      Impact:
                 All installers

Version 1.1.9 (July 14, 2006)
---------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00025778 )
                 Upgrade Installation of Teton Driver from T2.6 
                 Release Did not Update the Co-installer 
      Cause:
                 Bug in BWinInst.dll where reboot requests were not
                 properly handled
      Files:
                 BDrv5706:       BDrv5706Msm_*.ism, BDrv5706.ism
                 BDrvInstaller:  BDrvInstMSM_*.ism, BDrvInstaller.ism,
                 BMgmtInstaller: CustomActionMSM_*.ism, BMgmtInstaller.ism
      Change:    
                 Call new BWinInst API to set the property for reboot 
                 request and show reboot message based on the property
      Impact:
                 All driver installers.
   2. Problem:   ( Cont00025793 )
                 Scheduled Installation of Teton Driver Installer 
                 Fails to load Drivers in Win2K 
      Cause:
                 DIFxAPI returned access denied when trying to 
                 install as a scheduled task in logged off mode.
      Impact:
                 Teton driver installer.
      Files:
                 BDrv5706Msm_*.ism
      Change:    
                 Installer will run the install API in system context.
   3. Problem:   ( Cont00025817 )
                 Silent Upgrade over T2.6b Gold Release Pops up Message 
                 that Update is Successful 
      Cause:
                 Message is from T2.6b Gold MSI database when the old 
                 product is being removed. Custom Action that shows 
                 this message was not conditioned properly and got 
                 executed during silent major upgrade.
      Impact:
                 Teton driver installer.
      Files:
                 BDrv5706Msm_*.ism
      Change:    
                 Call FixForUpgrade.exe to patch the T2.6b Gold database
                 before doing upgrade.
 
   Enhancement:
   ===========
   1.  Change:
                 By request, changed ASF IP Monitor service name into:
                 "Broadcom ASF IP and SMBIOS Mailbox Monitor" 
                 (Refer to Cont00025052)
       Impact:
                 ASF Installer

Version 1.1.8 (July 2, 2006)
---------------------------------
   Fixes:
   ===========
   1. Problem:   ( Cont00025503 )
                 MSM based Installer v9.05.01 Fails to Install NDIS 
                 Client (nd50x v2.8.9) on Teton based NIC 
      Cause:
                 VBD Driver caused bus rescan during uninstallation
                 with multiple WSD enabled NIC, causing phantom
                 NDIS left behind.
      Impact:
                 BDrv5706, BDrvInstaller, BMgmtInstaller, Umbrella
      Files:
                 BDrv5706:       BDrv5706Msm_*.ism, 
                 BDrvInstaller:  BDrvInstMSM_*.ism, 
                 BMgmtInstaller: CustomActionMSM_*.ism
      Changes:    
                 1. BDrv5706: Call new API in BWinInst to disable 
                    VBD before uninstall.
                 2. All installers: In case of reboot is needed 
                    because disabling fails, condition unecessary 
                    custom actions not to run after reboot. All 
                    installers are affected because they are packaged
                    in umbrella.
   2. Problem:   ( Cont00022668 )
                 Canceled Mgmt Apps Setup May Leave SNMP in 
                 a non-working state
      Cause:
                 Installations involving drivers cannot be canceled
      Impact:
                 All installers
      Files:
                 All installers MSI project files
      Changes:    
                 Disable CANCEL button in the progress dialog
   3. Problem:   ( Cont00025482 )
                 Support Info for Teton Driver Installer Not 
                 Consistent with Legacy Driver and Mgmt Apps Installers
      Cause:
                 Teton installer missing custom actions to set
                 support info as other installers do.
      Impact:
                 Teton installer
      Files:
                 BDrv5706Msm_*.ism
      Changes:    
                 Added custom actions to set support info

   Enhancement:
   ===========
   1.  Change:
                 In case of upgrade, if WSD node is present or 
                 disabling child nodes fails, reboot and continue 
                 to upgrade.
       Impact:
                 Teton driver installer.

Version 1.1.7 (June 20, 2006)
---------------------------------
   Enhancement:
   ===========
   1. Change:
                 WSD Driver files are renamed to 8.3 format
      Impact:
                 Teton driver installer.

Version 1.1.6 (June 9, 2006)
---------------------------------
   Fixes:
   ===========
   1. Problem:
                 Cont00025098 - Unselecting/Reslecting Bacs/basp causes
                 managment installer to not install chm help file 
      Cause:
                 CHM is a hidden subfeature under BACS, and does not get 
                 selected if BACS is unselected and then implicitly reselected
                 by selecting BASP.
      Impact:
                 Management installer, Umbrella installer
      Files:
                 BMgmtInstaller.ism, Umbrella.ism
      Changes:    
                 Include CHM in BASP feature 
   2. Problem:   Cont00025056 - Upgrading Teton driver installer from a flash 
                 disk prompts the user for a 'Disk 1' 
      Cause:
                 Windows SourceList setting is pointing to the previous 
                 source location
      Impact:
                 Teton driver installer.
      Files:
                 BDrv5706Msm_AMD64.ism, BDrv5706Msm_IA32.ism, BWinInst.dll
      Changes:    
                 1. BWinInst function BInstBRCMSetDrvSrcList was hard 
                    coded for NetXtreme Driver Installer. 
                    Use MsiSourceListAddSource with Product Code
                    property instead to make function generic.
                 2. Added Custom action to call BInstBRCMSetDrvSrcList API of 
                    BWinInst.dll
   3. Problem:   If CIM is installed by 2 products, uninstalling
                 1 product will remove CIM all together. 
      Cause:
                 removal of CIM was done without checking if it 
                 was used by more than 1 product.
      Impact:
                 Management Installer and ASF Installer
      Files:
                 BWinInst.dll
      Changes:    
                 Remove CIM only if it is installed by 1 product.
   Enhancement:
   ===========
   1. Change:
                 Added WSD and ISCSI drivers to Teton driver installer
      Impact:
                 Teton driver installer.

Version 1.1.5 (May 25, 2006)
---------------------------------
   Fixes:
   ===========
   1. Problem:
                 Cont00024992 - BASP Link/Dependency to BACS in Mgmt Apps 
                 Installer Does Not Install BACS 
      Cause:
                 Feature table was re-oraganized to fix some validation errors.
      Impact:
                 Management installer.
      Files:
                 BMgmtInstaller.ism
      Changes:    
                 Include BACS MSM in BASP feature 

Version 1.1.4 (May 24, 2006)
---------------------------------
   Fixes:
   ===========
   1. Problem:
                 Cont00024895 - B57 driver installer for HP fails 
                 during the installation process. 
      Cause:
                 When we build the INF file name, the code was not prepared to
                 deal with W2k3 system as the check included only XP and w2k.
      Impact:
                 NetXtreme driver installer.
      Files:
                 BWinInst\service.cpp
      Changes:    
                 Reversed the INF file name check. If the platform is not AMD64 
                 or IA64, we now assume the platform to be IA32 and build the 
                 INF file name with full path. 
   2. Problem:
                 Cont00024860 - Teton Installer 9.02.02 - yellow bangs after 
                 on 2nd installation with two 5708 cards
      Cause:
                 When VBD is uninstalled after its child nodes, the devices 
                 are enumerated, and caused phantom devices left behind after 
                 uninstallation, which caused the problem on installation 
                 onwards.
      Impact:
                 Teton driver installer.
      Files:
                 BWinInst\internal.cpp, BDrvInstMSM*.ism, BDrv5706MSM*.ism
      Changes:    
                 BWinInstl.dll: Skip enumeration when VBD is uninstalled
                 Installers: Call BInstScanForHardwareChanges before uninstall
   3. Problem:
                 Cont00024941 - Mgmt Apps Installer v9.02.03 Does Not Install 
                 SNMP Interface Agent Correctly
      Cause:
                 Copy and paste error during migration from MSI based project.
                 Registry setting 
                 [HKEY_LOCAL_MACHINE\SOFTWARE\Broadcom\Bcmif\CurrentVersion]
                 has the wrong entries.
      Impact:
                 Management installer (IA32).
      Files:
                 SnmpMsm_IA32.ism
      Changes:    
                 Corrected registry entry.
                  

Version 1.1.3 (May 10, 2006)
---------------------------------
   Fixes:
   ===========
   1. Request:
                 CIM and SNMP are default selected. They should not be selected 
                 by default.
      Cause:
                 The install level for SNMP and CIM were put as 1 in the condition
                 when fixing validation error ICE79.
      Impact:
                 BMgmtInstaller
      Files:
                 BMgmtInstaller.ism
      Changes:
                 Changed install level from 1 to 101 in conditions of SNMP & CIM.
   2. Request:
                 BACS files were not removed after uninstall if previously
                 upgraded from version 7 of BMgmtInstaller.
      Cause:
                 Component ID was changed from version 7 to version 8 
                 while the keyfile remained the same.
      Impact:
                 BMgmtInstaller
      Files:
                 BacsMSM_IA32.ism
      Changes:
                 1. unset bacs.exe as the key file
                 2. add new registry key under HKCU to be the key path
                 3. change shortcut to non-advertised and set the target to bacs.exe
   3. Request:
                 BDrv5706 failed to install on W2K
      Cause:
                 Condition of Installing NDIS custom action does not include W2K
      Impact:
                 BDrv5706  Installer
      Files:
                 BDrv5706Msm_IA32.ism
      Changes:
                 Corrected the condition in custom action.
   4. Request:
                 File extraction failed if temp folder name has an extra dot, 
                 which caused the installation failed because DIFxAPI.dll is missing
                 from the temp folder.
      Cause:
                 BWinInst.dll failed to handle this use case.
      Impact:
                 BWinInst.dll
      Files:
                 BWinInst\internal.cpp
      Changes:
                 added support for the temp folder with an extra dot in the name.
   5. Request:
                 Silent.txt not up to date with new product code.
      Cause:
      Impact:
                 All installers
      Files:
                 Silent.txt files in all projects.
      Changes:
                 Updated product codes.

Version 1.1.2 (April 20, 2006)
---------------------------------
   Enhancement:
   ===========
   1. Request:
                 Support changing MSI package file name in buildscript.
      Cause:
                 Management installer has 2 different MSI package file names 
                 depending on the product configuration.
      Impact:
                 Buildscript, Management installer, Umbrella installer
   2. Request:
                 Changed BACS uninstall registry to use product code property 
                 instead of hard coded product code.
      Cause:
                 Since the registry had hard coded the product code, it has 
                 to be changed every time a major upgrade is done.
      Impact:
                 Management installer BACS MSMs
   Fixes:
   ===========
   1. Request:
                 Matched component ID with old projects, shared components.
      Cause:
                 For proper reference counting by Windows.
      Impact:
                 All installers
      Files:
                 All project files containing components
      Changes:
                 ID and shared property of components
   2. Request:
                 Moved Microsoft_DLL_IA32 component from BACS and SNMP 
                 to standalone MSM.
      Cause:
                 We are matching component ID and therefore we cannot have 
                 2 MSMs using the same component ID (build error).
      Impact:
                 Management installer, BACS MSM, SNMP MSM, Umbrella installer
      Files:
                 BMgmtInstaller.ism, BacsMSM_IA32.ism, SnmpMsm_IA32.ism, 
                 MicrosoftDllMsm_IA32.ism, BMgmtInstaller.xml,
                 Umbrella.ism, Umbrella.xml
      Changes:
                 Moved the reference to Microsoft_DLL_IA32 component.
   3. Request:
                 Changed product codes for major upgrade.
      Cause:
                 Feature and component tables have been changed from 
                 pre-MSM projects, so minor upgrade from the already 
                 released softwares would fail.
      Impact:
                 All installers
      Files:
                 All MSI project files
      Changes:
                 Product code
   4. Request:
                 Old 5706 installer has only 1 cab files, while the new MSM 
                 based 5706 installer has 4 cab files. It should only contain
                 1 cab file.
      Cause:
                 Most projects uses "one cab per component" option for custom 
                 compression, while the old 5706 installer uses "one cab per 
                 feature" option.
      Impact:
                 5706 driver installer
      Files:
                 BDrv5706.ism
      Changes:
                 change from "one cab per component" to "one cab per feature".


Version 1.1.1 (April 13, 2006)
---------------------------------
   Enhancement:
   ===========
   1. Request:
                 Moved BASP upgrade reboot message for Umbrella from 
                 BMgmtInstaller to Umbrella project.
      Cause:
                 
      Impact:
                 Management and umbrella installer.
   Fixes:
   ===========
   1. Request:
                 Custom action for upgrade BASP reboot message was never executed;
                 the existing message we saw after upgrade was actually from the 
                 BASP removed custom action.
      Cause:
                 Conditions for the custom actions were not correct.
      Impact:
                 Management installer
      Files:
                 CustomActionMSM_IA32.ism, CustomActionMSM_IA64.ism, CustomActionMSM_AMD64.ism
      Changes:
                 Fixed the conditions for custom actions.


Version 1.1.0 (April 12, 2006)
---------------------------------
   Fixes:
   ===========
   1. Request:
                 CQ# 20614
      Cause:
                 A registry was deleted after uninstallation.
      Impact:
                 Teton driver installer.
      Files:
                 BDrv5706.ism, BDrv5706Msm_AMD64.ism, BDrv5706Msm_IA32.ism
      Changes:
                 Display reboot message after uninstallation.

Version 1.0.1 (March 29, 2006)
---------------------------------
   Fixes:
   ===========
   1. Request:
                 Changed MSI package name for NetXtreme driver installer.
      Cause:
                 Regressed when creating new product config for 
                 MSI/MSM split-up.
      Impact:
                 NetXtreme driver installer.

Version 1.0.0 (March 29, 2006)
---------------------------------
   Fixes:
   ===========
   1. Request:
                 CQ# 24157
      Cause:
                 Cancelling during uninstall causes uninstall issues in Golfers
      Impact:
                 Management installer.
      Files:
                 BMgmtInstaller.ism
      Changes:
                 Cancel button is disabled once uninstallation is confirmed 
                 and started. Cancelling in the middle of uninstallation 
                 is not supported.
   Enhancement:
   ===========
   1. Request:
                 Extracted NetXtreme driver installer
                 functionality in to a separate MSM.
      Cause:
                 MSI/MSM split-up.
      Impact:
                 NetXtreme driver installer.
                 
                 
