Intel® Graphics Media Accelerator
Production Version 15.8.3.1504
Release Notes
June 27, 2008
Microsoft Windows
Note: Windows
INTEL
CONFIDENTIAL
DISCLAIMER: INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH
INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS,
INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING
LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL
PROPERTY RIGHT.
UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
This document contains information on products in the design phase of development.
All products, platforms, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. All dates specified are target dates, are provided for planning purposes only and are subject to change.
This document contains information on products in the design phase of development. Do not finalize a design with this information. Revised information will be published when the product is available. Verify with your local sales office that you have the latest datasheet before finalizing a design.
Code names featured are used internally within Intel to identify products that are in development and not yet publicly announced for release. Customers, licensees and other third parties are not authorized by Intel to use code names in advertising, promotion or marketing of any product or services and any such use of Intel's internal code names is at the sole risk of the user.
Intel is a trademark of Intel
Corporation in the
* Other names and brands may be
claimed as the property of others.
Copyright © 2007-2008, Intel Corporation. All rights
reserved.
Revision History
Date |
Driver
Revision |
Description |
Build Number |
June 27, 2008 |
15.8.3.1504 |
Production Version; fully validated |
1504 |
April 1, 2008 |
15.8.2.1461 |
Production Version; fully validated |
1461 |
March 7, 2008 |
15.8.1.1447 |
Production Version; fully validated |
1447 |
March 6, 2008 |
15.8.1.1447 |
Production Candidate; fully validated |
1447 |
February 22, 2008 |
15.8.0.1437 |
Production Version; fully validated |
1437 |
February 21, 2008 |
15.8.0.1437 |
Production Candidate; fully validated |
1437 |
December 20, 2007 |
15.8.0.1400 |
Beta engineering drop; not fully validated |
1400 |
Intel® Graphics Media Accelerator Driver
Note: Intel® 945G, 945GZ, 940GML, 945GM, 945GME, and
945GMS Express Chipsets will be End of Maintenance (EOM) for Windows Vista*
after the PV15.8 release.
The Intel® Graphics Media Accelerator Driver
contains support for the following Intel Chipsets:
· Intel® 945G Express Chipset
· Intel® 945GZ Express Chipset
· Intel® 946GZ Express Chipset
· Intel® G31 Express Chipset
· Intel® G33 Express Chipset
· Intel® G35 Express Chipset
· Intel® G965 Express Chipset
· Intel® Q33 Express Chipset
· Intel® Q35 Express Chipset
· Intel® Q963 Express Chipset
· Intel® Q965 Express Chipset
· Mobile Intel® 940GML Express Chipset
· Mobile Intel® 943GML Express Chipset
· Mobile Intel® 945GM Express Chipset
· Mobile Intel® 945GMS Express Chipset
· Mobile Intel® GL960 Express Chipset
· Mobile Intel® GLE960 Express Chipset
· Mobile Intel® GM965 Express Chipset
· Mobile Intel® GME965 Express Chipset
New Features
Features
Added in Baseline 15.8 |
|||
Reference No. |
Description |
Affected Components |
Build |
1009553 |
Display Link support phase 1 |
|
1413 |
|
|
|
|
Known Issues
Known Issues in Build 1504 |
||||
Reference
No. |
Description |
Affected
Component(s) |
Affected
OS(s) |
Affected
Project(s) |
2742425 |
CyberLink PowerDVD7, foxbear - The ACP signal is still present after switching the foxbear application to full screen mode. |
DVD |
Windows |
Mobile Intel® 965 Express Chipset Family |
Issues Resolved
Issues Resolved in Build 1504 |
||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
Bug ID: 105048 |
ProcAmpControls
is not supported with HD contents. |
N/A |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Resolution:
INF solution provided |
||||
Bug ID: 105346 |
Abnormal
display for welcome screen. |
NT -
miniport |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
The
issue was happening because driver had logic to apply gamma set by CUI for the
first OS call and from then on it will apply OS applied gamma. Fix was to look for a flag set during boot
and if it is not set apply OS sent gamma even for the first call. |
||||
Bug ID: 106316 |
MyDVD
application hung when preview video file in 'Edit Chapter' |
Direct3D* |
Windows
|
Intel®
945 Express Chipset Family |
Root Cause:
Root
cause: Shared access to the static m_nextTag variable of the EventQuery class
for each the instances of this class caused overwritting (value) issue.
Additionally the destructors of the EventQuery and OcclusionQuery classes
have been extended about clearing completion tags. |
||||
Bug ID: 2518983 |
Password
prompt screen is small 1st time on hot-plug modular HDD with password |
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
Panel
fitter was not getting disabled in native resolution of LFP panel. If
requested resolution is same as native resolution of LFP panel, then we
disable the panel fitter. |
||||
Bug ID: 2554732 |
Error
" Display driver igfx stopped responding..." intermittent |
Power
Conservation |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Solution: Fixed
InterruptHandler to not clear the IIR pipe event status in interrupt
enabling. The IIR pipe event status should only be cleared in ISR only. |
||||
Bug ID: 2554923 |
HD Adaptive
Deinterlace is not supported. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Adaptive
Deinterlacing was not a supported feature |
||||
Bug ID: 2554932 |
A
driver stop responding when WMVHD movie is played. |
DVD |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2555111 |
Guitar
Hero 3 - Game crashes while trying to launch the game when using Shader Model
3 |
Direct3D* |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Enabled
depth texture formats so that applications can do hardware accelerated shadow
mapping. |
||||
Bug ID: 2555608 |
Indeo4
codec movie collapses after movie window was resized. |
Media
Kernels |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
The
corrupted frame doesn't use denoise kernel but uses HQSCaling kernel, that’s
why the issue still seen. HQScaling
kernel now has support for UYVY and YUY2. |
||||
Bug ID: 2555748 |
FFBench
terminated abnormally. |
GHAL3D |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2556114 |
Driver
hangs up while decoding some conformance stream without ILDB. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2556855 |
[Mobile
Intel® 45 Series Chipset Family] HDMI hotplug not detected - HDMI
screen black out |
Soft
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557386 |
System
will BSOD with BenQ(FP241VW) HDMI Monitor. |
Soft
BIOS |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2557479 |
(HDMI)
BSOD happens when display 1920x1200 by EDT on [BenQ FP241VW] via HDMI. |
Soft
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557585 |
System
BSOD when run Half Life 2 DEMO |
Direct3D* |
Windows
|
Intel®
3 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557625 |
Video
playback of EVR corrupts with interlace DVD titles. |
DVD |
Windows
|
Intel®
4 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557649 |
The
text color of the DVD menu is incorrect. |
Media
Kernels |
Windows
Vista* |
Intel®
965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2557656 |
BenQ(FP241VW)
monitor BSOD when extend mode at 1920x1200 |
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2557718 |
[iHDMI/DP]
HDMI Hotplug / Unplug detection does not work well |
Soft
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557735 |
DX10
Driver fails to create more than 16128 queries for Assassin's Creed |
Direct3D* |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557740 |
Hotkey
display switching not working properly |
N/A |
Windows*
XP |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557787 |
When
run DVD Maker and CDS, corruption appears in upper side |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557853 |
Error
occur when running PCMarkVantage Memories2 (GPU image manipulation) |
Direct3D* |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2557996 |
Noise
appears at right border of video playback. |
Media
Kernels |
Windows
|
Intel®
3 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558035 |
Noise
appears at left side of video playback when drag the window. |
KMD
Render |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558063 |
Customer
can select the unsupported resolution for DVI device |
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558119 |
|
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558131 |
WinDVD
stopped responding after replug AC power line. |
Power
Conservation |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558132 |
Total
resume time exceeded Microsoft's maximum value from S3. |
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Solution:
|
||||
Bug ID: 2558161 |
No
video seen (only audio can be heard) when avi file is played in Windows
Vista* 64 |
DVD |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 105048 |
ProcAmpControls
is not supported with HD contents. |
N/A |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Resolution:
INF solution provided |
||||
Bug ID: 105346 |
Abnormal
display for welcome screen. |
NT -
miniport |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
The
issue was happening because driver had logic to apply gamma set by CUI for
the first OS call and from then on it will apply OS applied gamma. Fix was to look for a flag set during boot
and if it is not set apply OS sent gamma even for the first call. |
||||
Bug ID: 106316 |
MyDVD
application hung when preview video file in 'Edit Chapter' |
Direct3D* |
Windows
|
Intel®
945 Express Chipset Family |
Root Cause:
Shared
access to the static m_nextTag variable of the EventQuery class for each the
instances of this class caused overwritting (value) issue. Additionally the
destructors of the EventQuery and OcclusionQuery classes have been extended
about clearing completion tags. |
||||
Bug ID: 2518983 |
Password
prompt screen is small 1st time on hot-plug modular HDD with password |
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
Panel
fitter was not getting disabled in native resolution of LFP panel. If
requested resolution is same as native resolution of LFP panel, then we
disable the panel fitter. |
||||
Bug ID: 2558185 |
|
CUI2.5 |
Windows*
XP |
Intel®
3 Series Chipset Family |
Root Cause:
Overlay
Button is hidden in CUI Main Dialog from Cantiga Onwards. This
is being done as the Hardware Overlay is replaced with hardware Sprite. RCR:
1022178. Added |
||||
Bug ID: 2558236 |
Can't
open COPP session at iGPU mode |
Switchable
GFX |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558262 |
Corruption
with HLSLWithoutFX10 (DirectX SDK) |
N/A |
Windows
|
Intel®
965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2558428 |
Unstable
with DirectX SDK DX10 Sample [Skinning10 App] |
Direct3D* |
Windows
|
Intel®
965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2558442 |
CUI
Display selection menu is bad usability when both DVI monitor and HDMI TV are
connected. |
CUI2.5 |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558493 |
It
shows Garbage on |
Power
Conservation |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
The
calculation for the compressed buffer is: (stride (in bytes) x height (in pixels)) /
compression ratio For
32bpp, we will always set the compression ratio in the calculation to ‘1’ as
a first attempt (this translates to ‘00’ in bits [7:6]). If there is not enough memory, then we will
go to ‘2’ in the calculation (this translates to ‘01’ in bits [7:6]). We will stop trying after two attempts. For
16bpp, we will always set the compression ratio in the calculation to ‘1’ as
a first attempt (this translates to ‘01’ in bits [7:6]). If there is not enough memory, then we will
go to ‘2’ in the calculation (this translates to ‘10’ in bits [7:6]). We will stop trying after two attempts |
||||
Bug ID: 2558557 |
Green
unicolor playback or tiled previous playback is displayed immediately after
start playing. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558576 |
|
DVD |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
The
dynamically loaded RGB Scaling kernels had incorrect combine rules. Removed
the RGB NA1 component kernels and restructured combine rules for RGB Scaling
kernels. |
||||
Bug ID: 2558612 |
LCD
Missing when switching to iGPU after s3/s4 resume in dGPU mode |
Switchable
GFX |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558617 |
Very
bad screen flicker in DOS mode with 1604 VBIOS on 1366x768 panel |
Video
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558619 |
[EL/G45/Windows
|
Direct3D* |
Windows
|
Intel® 4 Series Chipset Family |
Root Cause:
1) Use
the setup fixed function unit instead of the geometry shader fixed function
unit to issue geometry shader threads on CTG/EGL devices if the following
restrictions are met: - rasterization disabled (no pixel shader,
depth test and stencil test disabled) - stream output enabled - EMIT and CUT instructions not inside flow
control instructions - no function calls 2)
Enable HW SVBI on CTG/EGL devices - Includes fix (DEV_JHFEIT_NO_VB) for case
when 16 vertex elements each point to 16 different vertex buffers, all of
which are not bound. The changes in my
getup branch exposed this problem. - Includes fix for SPECviewperf benchmark
with OpenGL driver in HWTnL mode. |
||||
Bug ID: 2558622 |
Text/2D
display is unclear on 1366x768 panel |
Video
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558623 |
"
Enable Application Settings Override" will be cuted in Intel GUI when
set DPI 120. |
CUI2.5 |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558685 |
PWM
duty value has a big error between the theory value and measurement values |
Power
Conservation |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558721 |
It
will hang up when blowing up and reducing Power DVD or Media player with Dell
2407WFPb monitor(1920*1200) on G31/ICH7 platform under Windows Vista* |
N/A |
Windows
Vista* |
Intel®
3 Series Chipset Family |
Root Cause:
Added
function to pass paging information structure and created entry in export
function table Modified
GMM query to get values from render export function instead of definitions Updated
paging buffer size to be dynamic |
||||
Bug ID: 2558786 |
ADI
capability flag is incorrect. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558793 |
Temporary
Blue belt-like noise appears when boot up Windows Vista*. |
NT -
miniport |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Fix
was to look for a flag set during boot and if it is not set apply OS sent
gamma even for the first call. This flag would be set to FALSE in Start device
call and would be set to TRUE in the first CUI gamma set call. This
is to prevent the flicker kind of behaviour during welcome screen while
booting. |
||||
Bug ID: 2558822 |
maxDotClock
has incorrect units |
Switchable
GFX |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558918 |
Video
driver error message poped up while playing DVD or Mediaplayer with DC power. |
Power
Conservation |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558928 |
Mouse
Cursor Disappeared After Removing AC While DRRST is Enabled |
Soft
BIOS |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2558975 |
BSOD happens
when pass bad SRM file to driver. |
DVD |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2558983 |
EFP2 device
disappears when both DVI and HDMI are set by BMP in VBIOS. |
Video
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Code
changes are done and Fix available in 1646 VBIOS vesion. |
||||
Bug ID: 2559057 |
While
playing audio files in WMP on DC, TDR error occurs and eventual BSOD 116 |
Power
Conservation |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559059 |
Play
avi file by media player but only hear sound no image display |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559176 |
Frame
flip happens when play interlaced DVD at FF8x ~ FF60x |
DVD |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
In
denoise, if we swap the buffers, we must always perform Denoise for the current
frame even if tSrc == rtDenoisedSample[DENOISED_CURR_SAMPLE], this is to
ensure that we use the correct current frame |
||||
Bug ID: 2559248 |
Indeo4
codec movie collapses after movie window was resized. |
Media
Kernels |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2559249 |
CUI 3D
Settings is incomprehensible in Danish |
Loc
Translation |
Windows
|
Mobile
Intel® 945 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2559301 |
HDCPSpecificationComplianceTestSpecification1.1
1B-01 Test fails. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559302 |
HDCPSpecificationComplianceTestSpecification1.1
1A-04/05/06/07 and 1B-01 Test fails. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559368 |
Corruption
is displayed on a few bottom lines in full screen mode when you play BD
interlaced title using WinDVD |
Media
Kernels |
Windows
|
Intel®
965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2559389 |
HDMI
is not recognized when hot-plug HDMI monitor. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559394 |
ForceBorderForMAR_AddSwSettings
option behavior is not correct on 4:3 display mode. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559412 |
[Welcome.AVI]
is not displayed by WMP11 (black out). |
DVD |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Removed
the RGB NA1 component kernels and restructured combine rules for RGB Scaling
kernels. |
||||
Bug ID: 2559431 |
Display
is fragmented, when we play " Unreal Toumament 3" |
Direct3D* |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
|
||||
Bug ID: 2559471 |
Some
avi files don't play |
DVD |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559547 |
Cannot
show video stream by playing AVI on Windows Media Player and |
DVD |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
The dynamically
loaded RGB Scaling kernels had incorrect combine rules. |
||||
Bug ID: 2559572 |
Surf's Up application freezes. |
Direct3D* |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
When
the application disables an index buffer, the D3D component of the driver
needs to notify GHAL3D that the index buffer is disabled. If it doesn't do this, on |
||||
Bug ID: 2559620 |
No System Tray Icon for IGPU after switching to IGPU on SG
system. |
Switchable
GFX |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559629 |
The
main video is black when opening camera by CyberLink YouCam. |
DVD |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
The
dynamically loaded RGB Scaling kernels had incorrect combine rules. |
||||
Bug ID: 2559639 |
HDMI
audio playback device still exist even without HDMI monitor. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559651 |
Unable
to start Cyberlink YouCam |
DVD |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
The
dynamically loaded RGB Scaling kernels had incorrect combine rules. |
||||
Bug ID: 2559664 |
Primary
and secondary device icons are displayed incorrectly in the CUI when using
EDT. |
CUI2.5 |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559705 |
Unable
to play back AVI file. |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
The dynamically
loaded RGB Scaling kernels had incorrect combine rules. |
||||
Bug ID: 2559709 |
The DVD playback is not displayed. |
KMD
Render |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Structure
for SCD escape call had padding issues for 64-bit KMD and 32-bit application. |
||||
Bug ID: 2559806 |
DVD
menu is not displayed normally |
Media
Kernels |
Windows
|
Mobile
Intel® 965 Express Chipset Family |
Root Cause:
HQScaling_Blending
module was incorrectly handling the alpha destination mask for U/V samples. |
||||
Bug ID: 2559822 |
HDMI
Sound does not work when a user connects HDMI cable to TV |
Soft
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
If
basic audio bit is set and if there is no 48kHz support in LPCM audio block,
gfx driver sets 2-channel support in 48kHz CAD. |
||||
Bug ID: 2559942 |
Media
Player clips not playing correctly |
DVD |
Windows
|
Intel®
965 Express Chipset Family |
Root Cause:
The
clip width is not DWORD aligned which is required by Dataport. The current round
up implementation makes the content protection give an assert in KMD.
Truncated the surface width to DW aligned. |
||||
Bug ID: 2559949 |
3DMark06
stops working while heat running. |
CLOAKING9 |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Uninitialized
floating point member variable. When the copy constructor is invoked if the
uninitialized data is SNAN then an exception is thrown. This issue was
sporadic dependent on the data in the uninitialized memory. |
||||
Bug ID: 2559980 |
March
2008 DirectX sampler SDK SubD10 has corruption |
Direct3D* |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2559990 |
[iDP/iHDMI]
Cannot select progressive mode w/ EDID for HDMI protocol test |
Soft
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Made
code changes to provide backward compatibility with 861 (CEA extension
revision 1) |
||||
Bug ID: 2560099 |
SlingDemo.wmv
clip played like slideshow when using QuickPlay or GraphEdit + EVR |
DVD |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2560111 |
DVI
can't be detected after resuming from warm dock |
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
FirstTimeDetection
is reset only after first active detection. |
||||
Bug ID: 2560160 |
Certain
tests in GLSLDemo 3.8 do not have the texture applied correctly |
OpenGL* |
Windows
|
Intel®
4 Series Chipset Family |
Root Cause:
The app
calls glValidateProgram before setting up a certain texture. We had that
function a little aggressive, returning error when texture is inconsistent.
But since the shader can still execute with an invalid texture, texture
consistency check is removed as a part of the passing criteria of this
function. |
||||
Bug ID: 2560188 |
HDMI
audio playback device cannot be seen even with HDMI plugged. |
Soft
BIOS |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
If basic
audio bit is set and if there is no 48kHz support in LPCM audio block, gfx
driver sets 2-channel support in 48kHz CAD. |
||||
Bug ID: 2560212 |
V64:
There are no BD playback screen only when AERO glass was disabled condition
w/32bpp color. |
KMD
Render |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Structure
for SCD escape call had padding issues for 64-bit KMD and 32-bit application. |
||||
Bug ID: 2560234 |
QXGA display
out causes a screen corruption on DDR3 3GB or 4GB system |
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
The
watermark calculation code was updated to handle error conditions. |
||||
Bug ID: 2560425 |
192KHz
is not listed when gfx is set to lower than 720 |
Soft
BIOS |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Earlier
reference frequencies were incorrect with only 48khz, 96kHz and 384khz. So 192kHz/2-channel audio are not getting
pruned in any video format. |
||||
Bug ID: 2560449 |
Cannot
play BD on 64bit OS |
N/A |
Windows
Vista* |
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Structure
for SCD escape call had padding issues for 64-bit KMD and 32-bit application. |
||||
Bug ID: 2560527 |
Running
3DMARK06 for a long time causes an error message to appear. |
CLOAKING9 |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Uninitialized
floating point member variable. When the copy constructor is invoked if the
uninitialized data is SNAN then an exception is thrown. This issue was
sporadic dependent on the data in the uninitialized memory. |
||||
Bug ID: 2560562 |
Display
Switch hotkey not functioning in Windows and DOS |
N/A |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
||||
Bug ID: 2560610 |
During
3D Mark Demo Test, an error message is generated |
CLOAKING9 |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
This
issue was only on later drivers. |
||||
Bug ID: 2560693 |
3Dmark06
show stops working |
CLOAKING9 |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
Uninitialized
floating point member variable. When the copy constructor is invoked if the
uninitialized data is SNAN then an exception is thrown. This issue was
sporadic dependent on the data in the uninitialized memory. |
||||
Bug ID: 2560720 |
Overnight
run 3DMark06 encounters error message |
CLOAKING9 |
Windows
Vista* |
Intel®
3 Series Chipset Family |
Root Cause:
Uninitialized
floating point member variable. When the copy constructor is invoked if the
uninitialized data is SNAN then an exception is thrown. This issue was
sporadic dependent on the data in the uninitialized memory. |
||||
Bug ID: 2559471 |
Some
avi files don't play |
DVD |
Windows
|
Mobile
Intel® 45 Series Chipset Family |
Root Cause:
|
Issues Resolved in Build 1461 |
||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
||||
Bug ID: 103828 |
Rotation function failed when choosing rotation angle from system tray menu (right click on desktop) of Hungarian Windows Vista* 32bit OS |
Loc Translation |
Windows |
Intel® 3 Series Chipset Family |
||||
Root Cause:
In CUI, when user selects any Rotation angle from Tray, the tray/DTCM Rotation string 3079 (IDS_GRAPHICS_MENU7) is compared with the Rotation string 3071 (IDS_ROTATION_TITLE). So it is very important that these two strings are same. Otherwise the check fails, and CUI is not able to find out the requested action. The issue is fixed by making the above mentioned two strings same |
||||||||
Bug ID: 2553333 |
JOGL app crashes on Windows Vista* drivers only |
OpenGL* |
Windows |
Mobile Intel® 965 Express Chipset Family |
||||
Root Cause: #1 During swapbuffer operation (related to drawable
object) GL context is modified. But application |
||||||||
Bug ID: 2554932 |
Graphics driver stops responding when WMVHD movie is played. |
DVD |
Windows |
Mobile Intel® 965 Express Chipset Family |
||||
Root Cause:
Issue is fixed by ILDB perf optimizations. |
||||||||
Bug ID: 2555123 |
The system will hang when playing video file at 1920x1200 full screen. |
KMD Render |
Windows |
Intel® 3 Series Chipset Family |
||||
Root Cause: Added paging information structure to pass paging dma buffer size and paging dma private size Added function to pass paging information structure and created entry in export function table Modified GMM query to get values from render export function instead of definitions Updated paging buffer size to be dynamic |
||||||||
Bug ID: 2555673 |
Display Device is unexpectedly switched to CRT only when quickly opeing and closing LCD Lid on LCD+CRT/EDT. |
CUI2 |
Windows |
Mobile Intel® 965 Express Chipset Family |
||||
Root Cause: 1. System in CRT + LFP extended desktop and this would be saved in registry key 4097_A 2.Do a lid close and lid open quickly 3. At this time the system would have already be in SD CRT for the first lid event and it is supposed to save the configuration in 1_A 4. Since the second lid event came in between , driver will start returning the available devices to be 4097 and hence the SD CRT config will be saved in key 4097_A corrupting the value which is present. Fix Description: Save the available device in a global variable at the time of loading the config. This global value will be compared with the available device returned from driver before saving in registry. If the values compared happened to be different (which means some event has entered in between which will corrupt the existing registry value), call the method AvoidRegistryCorruption. This method in turn takes care of saving configurations to the proper registry key. |
||||||||
Bug ID: 2556282 |
Intel HDMI audio issues HBR packets, even if HDMI sink doesn't support High Bit Rate audio. |
AIM Module |
Windows |
Mobile Intel® 945 Express Chipset Family |
||||
Root Cause: Driver was enabling data transmission from the buffer allocated for VS IF even if no valid data was present. Now enabling data transmission only if there is valid info frame in the buffer. |
||||||||
Bug ID: 2557219 |
Cannot enter s3 with resolution 1920x1200 |
KMD Render |
Windows |
Intel® 3 Series Chipset Family |
||||
Root Cause: Added paging information structure to pass paging dma buffer size and paging dma private size Added function to pass paging information structure and created entry in export function table Modified GMM query to get values from render export function instead of definitions Updated paging buffer size to be dynamic |
||||||||
Bug ID: 2558395 |
Scaling quality on Overlay is not good |
N/A |
Windows |
Intel® 3 Series Chipset Family |
||||
Root Cause: Overlay hardware downscaler has higher quality than 3dBlter engine. A fix was implemented to downscale partially via 3dBlter when needed (by using Disable_OverlayDSQualityEnhancement registry key), and finalize downscale in Overlay Hardware. |
||||||||
Issues Resolved in Build 1447 |
||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
||||
Bug ID: 2552981 |
Sometimes screen is abnormal after changing to 800*600 in clone mode. |
Soft BIOS |
Windows |
Mobile Intel® 965 Express Chipset Family |
||||
Root Cause Assigning panel fitter to LFP correctly. |
||||||||
Bug ID: 2554117 |
The Video Standard for TV is NTSC_443 after switching the display device from DDC mode to TV only mode via pressing CUI hotkeys. |
CUI2 |
Windows Windows |
Intel® 3 Series Chipset Family, |
||||
Root Cause: The issue is TV standard is not getting persisted. The flag which was introduced for optimization of flashes is not set from persistence. Once the call lands from persistence to Dev layer, since this flag is not, the call for UpdateTVstandard won’t happen and Driver will not get a call for Tvstandard change. Fix Description: One more flag needs to be updated and that is "dwFlags". We have a check in UpdateTVStandar where based on the bit set the flag, the data will be assigned to structure which does the escape call. |
||||||||
Issues Resolved in Build 1437 |
||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
||||
BugID: 2551349 |
Intermittently changing resolutions for TV display causes corruption |
Soft BIOS |
Windows* XP Windows |
Intel® G965 Express Chipset |
||||
Root Cause: Code changes have been made to honor the SPD I2Cspeed which is read by vbios from the ADD2 Card. the interfaces have been defined, and data is now obtained from VBIOS |
||||||||
BugID: 2553815 |
X61T: PC-Doctor detects V-mem error when image rotated 180deg |
Rotation |
Windows Vista* Windows |
Intel® GM965 Express Chipset |
||||
Root Cause: The application was trying do the few blts, ColorFill operations on the FB and then was comparing by drawing it on the system memory. Failing while doing the ColorFill operation at 90,180 and 270 degree rotation angles because In the __KmGen4SetPresent3DColorFillState function, while setting the ColorFill states we check that if the rotation angle is other than the identity, then we rotate the Destination rectangle according to the Rotation orientation and while setting the vertices for destination rectangle we were setting the vertices of the unrotated rectangle(primitiveRect) which is wrong. So set the vertices of the Destination Rectangle according to the rotated rectangle. |
||||||||
BugID: 2554695 |
(SD-Etude) Video playback flashes when play DVD on Aero Disable mode. |
DVD |
Windows Vista* Windows |
Intel® GM965 Express Chipset |
||||
Root Cause: Certain GetResourceXXX functions were added to handle temporary resources more easily and some code cleanup was done to use these functions. During that cleanup, the renderAllocationIndex was incorrectly set using the new GetResourceAllocationIndex() function. |
||||||||
BugID: 2555089 |
OpenGL* issue -> Error on running bitmap2.exe with Windows* XP SP2 on Intel® Q965 system |
OpenGL*, |
Windows |
Intel® 3 Series Chipset Family |
||||
Root Cause: DrvCopyContext() is not implemented. Fix Description: Add implementation for the function. NOTE: The current solution does not fix the problem for Gen3 and Windows* XP. All others should be fixed |
||||||||
BugID: 2555193 |
Update Denoise / Detail Kernels for UYVY Support |
DVD, |
Windows Vista* Windows |
Intel® G965 Express Chipset |
||||
Root Cause: Minor Updates were made to the Denoise and Detail Kernels in the v071127 Release (for Gen4) and the v071121 Release (for Gen4.5). |
||||||||
BugID: 2555259 |
Can not play Indeo3.2 movie by WMP11. |
DVD, |
Windows |
Intel® GM965 Express Chipset |
||||
Root Cause: 1. Remove RGB16 support in query caps function. 2. Fix a minor bug in DXVA_ValidateFilterGraph_g4. |
||||||||
BugID: 2555418 |
Intel® GM965 Express Chipset CxSR Dynamic watermark bug fix. |
Power Conservation, |
Windows Vista*
Windows |
Intel® GM965 Express Chipset, |
||||
Root Cause: CxSR dynamic watermark bug fix for Intel® GM965 Express Chipset. Intel® GM965 Express Chipset: In addition to normal restrictions testing and CUI dynamic enabling/disabling testing, please also do the Windows Vista* cursor workaround test as follows: 1) Windows Vista* Aero 2) Open Window 3) Drag Window around and make sure that mouse cursor does not disappear. |
||||||||
BugID: 2555452 |
The corruption is displayed after resuming the system from Suspend state (S3). |
GMM, |
Windows Vista* Windows |
Intel® 945GM Express Chipset, |
||||
Root Cause: Corruption during sleep and hibernate on Intel® 945GM Express Chipset Windows Vista* on 15.8 build This affects only Intel® 945G Express Chipset and Intel® 945GM Express Chipset. |
||||||||
BugID: 2555696,2555705 |
W - WLK - Graphics Bus Transfer - Failing Log |
Resource Manager, |
Windows |
Intel® 3 Series Chipset Family |
||||
Root Cause: Added GMM limit check before evaluating modes to be added to mode list Added Function: BwGMMLimitChecks Description: Checks if the Mode is within the GMM limit Notes: Intel® GM965 Express Chipset including Bearlake MAX Mode supported = 2048x1536 |
||||||||
BugID: 2555916 |
Software(Nero) install issue with G35 Gfx driver |
NT - miniport |
Windows Vista* Windows |
Intel® 3 Series Chipset Family |
||||
Root Cause: The issue was happening because of PCI Config accesses as part of a WA while setting text mode in SoftBIOS. This happens only in the path of ResetDevice as at this point DXGK exposed function pointer addresses are unmapped causing invalid pointers for PCI Config accesses. However, this did not happen on CRBs, so it purely depends on the timing of ResetDevice getting called. Fix Description: The fix for this issue is to use HakGetBusDataByOffset and HalSetBusDataByOffset DDIs for accessing PCI Config space in ResetDevice handler when the call is coming for Shutdown or Restart instead of Dxgk based interfaces. |
||||||||
BugID: 2556358, 2556655, 2556685 |
Fix hanging overlay playback |
KMD Render |
Windows Vista* Windows |
Intel® G965 Express Chipset |
||||
Root Cause: Overlay playback was hanging in apps when skipping forward or backwards. An escape call to verify whether the resources were available for lock was failing because we were using the wrong register in Gen4 after a change for Gen5. Fix Description: Updated variable use to reflect correct register |
||||||||
BugID: 2556684, 2556686, 2556689 |
Persistence w/a to fix DL issue:2554772 |
CUI2, CUI2.5 |
Windows Vista* Windows |
Intel® GM965 Express Chipset |
||||
Root Cause: With LFP and DL in DDC, on resuming from hibernate, display comes up in LFP + CRT DDC, highly sporadic and was reproducible only on some setups, on hibernate, debug outcome as follows ·DL issues a detach call (to shutdown all DL specific services) on resuming from hibernate ·CUI queries driver for the currently connected devices, driver reports LFP and CRT ·Since call for attach has not yet happened from DL, CUI drives DDC on LFP + CRT (next available device), ·While saving this config, CUI once again queries driver for connected devices, which is reported as DL display (as attach has now happened), LFP & CRT, ·CUI saves LFP + CRT DDC in registry (thus corrupting registry) hence the issue, purely a synchronization issue, hence sporadic |
||||||||
Issues Resolved in Build 1413 |
||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
||||
BugID: 2553055 |
CUI not loading in desired language once it is set in
Regional and Language Tab |
CUI2, |
Windows* XP, Windows*
XP-64,
Windows Vista*, Windows |
Intel® 945GM Express Chipset, |
||||
Resolution
Description: Root Cause: MUI support for Windows Vista*: With these changes, whenever user changes the OS display language in Regional and Language Settings Tab in Control Panel and perform a logoff and logon, CUI will show up in new language. If it is not one of the supported languages, then CUI would show up in English. These changes also apply for Non MUI OS also. In this case, there is no option to change OS display language, but user can change the default locale. If it is changed and user performs a log-off and log-on, CUI will show up in that language. |
||||||||
BugID: 2550940 |
Warning message is not displayed after launching TV Wizard application via WINDOWS MEDIA* CENTER at CRT+Digital TV DDC mode. |
TV Wizard |
|
Intel® 3 Series Chipset Family |
||||
Root Cause: In 10ft with Digital TV as one of the active display in MDS configuration, if we try to Launch 10ft TVWizard, it’s not showing the Warning message as expected in MyApp.xaml.cs. When the page has to be initialized, there is a creation of "PageDefault" object and initialization of the same which internally is corrupting the actual retrieved data of "data.TvObj.IsTVDualActive". Fix Description: On the first initialization in MyApp, check for "data.TvObj.IsTVDualActive" and then proceed with other initializations. This will avoid the corruption of data and the warning message will be displayed. |
||||||||
BugID: 2553772 |
glCopyPixels( ) failure when default glPixelZoom(1,1) is active |
OpenGL* |
Windows* XP, Windows* XP-64 |
Intel® G965 Express Chipset |
||||
Root Cause: Drawing into double buffered OpenGL window with glDrawBuffer( ). Then use glCopyPixels(
) to move e.g. backbuffer contents to front buffer. The problem seems to
happen when glPixelZoom is (1,1). glFlush
and glFinish do not help make result visible. |
||||||||
BugID: 2553745 |
TDR occurs on resume from S3 resume |
Direct3D*,GMM,KMD Render |
Windows Vista*, Windows |
Intel® 945GM Express Chipset |
||||
Root Cause: Driver was not
saving stolen memory on S3 events. Fix Description: Updated power management logic to unconditionally save/restore stolen memory on S3 events. Windows Vista* Hybrid Sleep feature implies that system could potentially go into hibernate after being in sleep for a duration of time. Driver wouldn't be notified in that event. |
||||||||
BugID: 2554499 |
Compare with PV15.6, DVD quality is poor
(Flicker/Jaggy) |
DVD |
Windows Vista*, Windows |
Intel® G965 Express Chipset, |
||||
Root Cause: When DenoiseV2 / DetailV2 Support were added code cleanup was also done. This unintentionally caused the MODEAST Motion History Buffer to be initialized to the default value for every frame instead of just once. This causes deinterlacing artifacts, especially in the HQV Color Bars test. Fix Description: The fix was to only initialize the Motion History buffer once. |
||||||||
BugID: 2519373, 2553176 |
It has some garbage on WinDVD5 at the start of DVD |
DVD |
Windows* XP |
Intel® G965 Express Chipset, |
||||
Root Cause: Additional binding table indices for PL output were added, but the binding table and surface state heap sizes were not adjusted for this change so that the right amount of space could be allocated and initialized. Fix Description: This issue is resolved by updating the
sizes of the binding table and the surface state heap. |
||||||||
BugID: 2551221 |
Noisy screen appears on CRT with High resolution and High refresh rate. |
Soft BIOS |
Windows |
Intel® GM965 Express Chipset |
||||
Root Cause: The cursor SR WM values were calculated incorrectly in driver. Fix Description: Made following changes: 1) While calculating cursor WMs, we need to consider FIFO size of already enabled display planes. Earlier we were using FIFO size for cursor. 2) For TLB adjustment, we now check the whether 8 lines fit in FIFO, instead of 7. |
||||||||
BugID: 2554695 |
Video playback flashes when play DVD on Aero Disable mode. |
DVD |
Windows Vista*, Windows |
Intel® GM965 Express Chipset |
||||
Root Cause: GetResourceXXX functions were added to handle temporary resources more easily and some code cleanup was done to use these functions. During that cleanup, the renderAllocationIndex was incorrectly set using the new GetResourceAllocationIndex() function. Fix Description: This resolution is to fix the renderAllocationIndex and remove function overloading for the GetResourceXXX functions. |
||||||||
Issues Resolved in Build 1400 |
||||||||
Reference No. |
Description |
Affected Component(s) |
Affected OS(s) |
Affected Project(s) |
||||
N/A |
|
|
|
|
||||
|
||||||||