Products
|
 |
 |
 |
Hardware Highlights |
Software Highlights |
Features Matrix
The Intel® 82562 controller family contains highly integrated Platform LAN Connect devices combining 10BASE-T and 100BASE-TX physical layer capabilities. These controllers are a core ingredient of the enabling solution for the integrated networking connectivity in Intel® I/O Controller Hub (ICH) based platforms. All versions support a single interface fully compliant with the IEEE 802.3/802.3u standard. The IEEE 802.3u standard for 100BASE-TX defines networking over two pairs of Category 5 unshielded twisted pair cable. The 82562 family complies with the IEEE 802.3u Auto-Negotiation (and 100BASE-TX) standard and the IEEE 802.3x Full-Duplex Flow Control standard.
The combination of an 82562 controller with an ICH LAN solution is a 32-bit PCI device that features enhanced scatter-gather bus mastering capabilities allowing high-speed data transfers over the PCI bus. The bus mastering capabilities enable the LAN solution to process high-level commands and perform multiple operations, thereby offloading communications tasks from the system CPU. Two large transmit and receive FIFOs are also included in the architecture to enhance performance while minimizing the use of system resources.
|
|
 |
|
 |
|
Target applications include but are not limited to LAN on motherboard (LOM) and Communications and Networking Riser (CNR) form factors targeted at the value segment. These designs could include embedded and PC target applications requiring reliable 10/100 LAN capabilities. The 82562 family enables additional enterprise management capabilities beyond this baseline. When combined, the 82562, the 82562 software, and the embedded LAN capability in the ICH2/3/4 make up Intel's newest high quality 10/100 Mbps solution – the Intel® PRO/100 VE/VM Network Connection.
 | IEEE 802.3 10BASE-T compliant physical layer interface |
 | IEEE 802.3u Auto-Negotiation and 100BASE-TX support |
 | Digital adaptive equalization control |
 | Link status interrupt capability |
 | XOR Tree mode support for board testing |
 | 3-port LED support (speed, link and activity) |
 | 10BASE-T auto-polarity correction |
 | Diagnostic loopback mode |
 | 1:1 transmit transformer ratio support |
 | Low power (300 mW) typical in active transmit mode |
 | Reduced power(less than 50 mW) in "unplugged mode" |
 | Automatic detection of "unplugged mode" |
 | 3.3V device |
 | Platform LAN connect interface support |
 |
 | Intel® SingleDriver™ technology (10/100Mbps support) |
 | Certified and validated support for most common operating systems |
 | Instrumentation support for CIM/WBEM, SNMP, DMI, PXE 2.0 |
 | Intel® PROSet Utility support for installation and configuration |
 | Alert on LAN* Software Developer Kit (SDK) and sample code — 82562EM only |
 |
The 82562 device family consists of nine different versions.
|
|
Features |
ET |
EM |
EP |
EX |
EZ |
G |
GT |
GZ |
GX |
Footprint compatible with the Intel® 82540, 82541, 82547, 82573 Gigabit Ethernet controllers |
|
|
|
 |
 |
|
|
 |
 |
Alert on LAN 1.0 support |
|
 |
 |
 |
|
|
|
|
|
3-port LED support (speed, link, and activity) |
 |
 |
 |
 |
 |
 |
 |
 |
 |
LED support for three logic configurations |
|
|
|
|
|
 |
 |
 |
 |
WfM Baseline and NetPC Specification compliant |
 |
 |
 |
 |
 |
 |
 |
 |
 |
ACPI support |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Magic Packet filtering for Wake on LAN support |
 |
 |
 |
 |
 |
 |
 |
 |
 |
ARP and flexible frame support |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Automatic detection of "unplugged mode" |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Low power (less than 300 mW in active transmit mode) |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Platform LAN connect interface support |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Low power 3.3 V device |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Auto MDI, MDIX crossover at all speeds |
|
|
|
|
|
|
 |
 |
 |
1-pin LAN disable |
|
|
|
|
|
|
 |
 |
 |
VLAN support |
 |
 |
 |
 |
|
|
 |
 |
 |
Priority tagging |
 |
 |
 |
 |
|
|
 |
 |
 |
Teaming initiation |
 |
 |
 |
 |
|
|
 |
 |
 |
RoHS compliant package available |
 |
|
 |
|
 |
 |
 |
 |
 |
Package type: |
48-pin SSOP |
 |
 |
|
|
|
 |
 |
|
|
64-pin PBGA |
|
|
 |
|
|
|
|
|
|
196-pin PBGA |
|
|
|
 |
 |
|
|
 |
 |
|
|
 |
|
|