|
Resolved Issues in 11.5.0.1207 PV
|
|
|
Reference No
|
Description
|
Affected OS's
|
|
4160001
|
The system hangs when activating the
accelerometer feature upon entering into S4/S5
|
Windows 8,Windows 8 - 64
|
|
4160101
|
BSOD 0xD1 during boot
|
Win7
|
|
4160109
|
ISM abort when coalescing partial NV
cache hit
|
Win7
|
|
4159742
|
“ATA “ prepended to
ATAPI devices on Win8
|
Windows 8 - 64
|
|
4160098
|
PC reboots permanently and cannot enter into BIOS
menu after dirty-shut down occurred with 31 OROM entries.
|
Win7-64
|
|
4159487
|
Sporadic memory corruption when booting from RAID
volume
|
Win7-64
|
|
4159673
|
NVM mode change failed resulting in BSOD
|
Windows Server 8 - 64
|
|
4160070
|
BSOD 0x0A or 0xA0 at S4 resume
|
Windows 8 - 64
|
|
4159965
|
The metadata cannot be deleted on all disks with
a single rstcli32/64 command
|
Windows 8,Windows 8 - 64
|
|
4159946
|
RST 11.5 - Hybrid Resume performance drop
|
Windows 8,Windows 8 - 64,Windows Server 8,Windows
Server 8 - 64
|
|
4159986
|
TRIM causing decreased performance w/ SandForce SSDs, others in pass-thru, RAID and SRT
|
Windows 8 - 64
|
|
4159989
|
ZPODD incorrectly powers OFF on S3 resume when tray
or media is present
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
4158742
|
ZPODD: Fails: “Waiting for drive to power down”
|
Windows 8 - 64
|
|
4159974
|
ZPODD fails to update tray status while awake
when tray is inserted
|
Windows 8 - 64
|
|
4159239
|
Increased power consumption, fails SRT power
requirement
|
Win7-64
|
|
4159608
|
ZPODD woke up after S3/S4 but should still be
asleep.
|
Windows 8 - 64
|
|
4159922
|
RSTCLI throws a debug error when we attempt to
create ANY RAID volume
|
Win7
|
|
4159944
|
AOAC spin down % is 0 after resuming from S3
|
Windows 8 - 64
|
|
4159276
|
Re-accelerating the system disk (that was
accelerated with a dissociated cache) with a SECOND SSD after performing a dirty
shutdown induces BSOD F4 and leaves ONLY the data volume on the second cache
SSD
|
Win7-64
|
|
4159649
|
GUI - Create button unavailable after creating R1
with <100% capacity & volume graphic unresponsive
|
Vista,Win7
|
|
4159910
|
ATA PASSTHRU (PT) NOP command causes BSOD D1,
then BSOD 7B on Win7 in RAID mode if a RAID volume exists
|
Win7-64
|
|
4159907
|
Several ATA commands sent via ATA PT or SCSI-ATA
PT return incorrect Task File status (busy bit)
|
Win7-64,Windows 8 - 64
|
|
4159908
|
ATA PT IOCTLS returning OS Error Detected: 1117
(ERROR_IO_DEVICE) on Win7
|
Win7-64
|
|
4159911
|
Read Smart Data with SMART disabled should fail,
but returns passing status.
|
Win7-64,Windows 8 - 64
|
|
3236551
|
Accelerate button shows up in the RST UI after
booting with no SSD attached and then hot plugging an SSD during OS runtime
|
Win7-64
|
|
4159600
|
ODD tray is ejected automatically when ODD is
disabled by device manager setting.
|
Win7-64,Windows 8 – 64
|
|
4159862
|
UI exposes Create button to the user when there
is only one disk available for RAID volume-creation
|
Win7-64
|
|
4159262
|
ODD tray ejects automatically while resuming from
hybrid S3
|
Windows 8 – 64
|
|
4159239
|
Increased power consumption, fails SRT power
requirement
|
Win7-64
|
|
4159866
|
SRT performance failing QRC requirements in Win8
|
Windows 8 – 64
|
|
4158848
|
CLI 32/64: The volume and disk display is not in a
delimited format which breaks from the legacy RAIDCFG32/64 output format
|
Win7,Win7-64,Windows 2008,Windows 2008-64
|
|
4159637
|
An unexpected message popped up when burning DVD
with Roxio but it is ok if wait >25 seconds
|
Win7-64
|
|
4159716
|
Driver is incorrectly enumerating after a
hot-plug when PHY is offline
|
Win7-64,Windows 8 – 64
|
|
4159384
|
RRT recovery disk usage is no longer an array
member after user selects ‘access recovery disk files’
|
Windows 8 – 64
|
|
4159490
|
Multi-Phase Resume not working properly in Win8
|
Windows 8 – 64
|
|
4159495
|
eSATA HDD will be connected again soon after
removing it from Safely Remove
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
4159744
|
CLI 32/64: command (--cachesize)
should error on any unknown command
|
WinPE 2.0
|
|
4158757
|
Unlocking a locked member disk during a RAID0 to
RAID5 migration causes the disk failure
|
Windows 8 - 64
|
|
4159483
|
WHQL: INF Verification failure due to filter driver
registry entries (WHCK2.0 BLOCKING)
|
Win7,Win7-64,Windows 2008-64,Windows 8,Windows 8
- 64,Windows Server 8 - 64
|
|
4159603
|
RRT: Error icon is not seen when unplugging the
Recovery Drive.
|
Windows 8 - 64
|
|
4159607
|
BSOD 0xD1 occurs when hot-unplugging a ZPODD
|
Win7-64
|
|
4159360
|
BSOD 0xD1 occurs during extended hybrid sleep
cycling test
|
Win7
|
|
4158881
|
The UI allows for the creation of a System Volume
that totals greater than 2TB
|
Windows 8 - 64
|
|
4159649
|
GUI: Create button unavailable after creating R1
with <100% capacity & volume graphic unresponsive
|
Vista,Win7
|
|
4159707
|
Selecting a cache size of 18.6 GB via the custom
cache field on a 64 GB SSD induces unknown error
|
Win7-64
|
|
4159745
|
CLI32/64 tool creates Cache Volume with incorrect
strip size of 16KB
|
WinPE 2.0
|
|
4159541
|
Disabling acceleration on the OS disk after going
through change mode cycles causes the UI to expose the ‘Disassociate’ link on
the Accelerate Page and displays an incorrect state of Port 0 on the Status
Page.
|
Win7-64
|
|
4158746
|
UI allows drives to be unlocked when HDD Unlock
is disabled in the BIOS BCFS options.
|
Win7-64
|
|
4159284
|
Error "No Zero Power ODD or Intel RST drive
found" when using Intel ZPODD tool on a system that contains a 2nd
controller
|
Win7-64
|
|
4159442
|
BSOD occurred after creating storage space and
set Resiliency to "Simple" or "Two-way mirror"
|
Windows 8 - 64,EFI
|
|
4159279
|
UI fails to refresh the "Status:
Failed" string when remaining within the acceleration page after failing
an accelerated RAID volume
|
Win7-64
|
|
4159573
|
In Verify and Repair the next scheduled run
date/time does not change on 2nd re-occurrence options if shorter within the
same session
|
Windows 8 - 64
|
|
4158993
|
Smart event disk can be used to rebuild degraded
volume
|
Windows 8 - 64
|
|
4159148
|
Write caching of SSD cannot be disabled
|
Windows 8 - 64
|
|
4159186
|
Accelerating the system disk with a disassociated
cache SSD after resetting the SSD to available induces an unknown error
|
Win7-64
|
|
4159566
|
System hangs and crashes when trying to run MobileMark 2007
|
Win7-64
|
|
4159676
|
The RST notification area icon disappears after
checking "Show notification area icon"
|
Windows 8 - 64
|
|
4159606
|
Disk status change to 'unknown disk' when
accelerated volume is deleted
|
Windows 8 - 64,Win7-64
|
|
4159506
|
BSOD after hot-unplug of ATAPI drives due to completion
handler call accessing destroyed EndDevice object
|
Vista,Vista-64,Win7,Win7-64,Windows 2008,Windows
2008-64,Windows 8,Windows 8 - 64
|
|
4159540
|
Selecting the default custom size value 64 GB for
a >64 GB SSD uses the ENTIRE SSD for the cache
|
Win7-64,Windows 8
|
|
4159421
|
Write-error occurs when burning DVD+R DL media.
|
Win7-64
|
|
4159443
|
FFS partition won't be created because the rest
of the mSATA's unallocated space can't be seen
|
Win7-64,Win7
|
|
4159553
|
Locked disk state does not change after unlock in
UI
|
Windows 8 - 64
|
|
3236450
|
Sporadic memory corruption when booting from RAID
volume
|
Windows 8,Windows 8 - 64
|
|
4159405
|
ODD tray eject period is degraded when RST11.5 is
installed.
|
Win7, Windows 8
|
|
4158583
|
Write Back Cache negatively impacts performance
when flushing is enabled
|
Win7-64
|
|
4159072
|
Kernal_Data_Inpage_Error BSOD on Win 8 with S3 cycles or after restart
|
Windows 8 - 64
|
|
4159259
|
Internal system disk in Safely Remove hardware
list
|
Windows 8 - 64
|
|
4158923
|
ZPODD: Does not go to sleep with Roxio 10.3
opened
|
Win7-64,Windows 8 - 64
|
|
4159055
|
IOCTL_STORAGE_QUERY_PROPERTY with StorageDeviceSeekPenaltyProperty is failed as ERROR_INVALID_FUNCTION
|
Windows 8 - 64
|
|
4159060
|
Device Manager shows incorrect information for
SATA devices
|
Windows 8 - 64
|
|
4159175
|
Accelerating the system disk with a disassociated
cache SSD that was previously associated to a passthrough
disk will induce BSOD D1
|
Win7-64
|
|
4159122
|
UI: An unknown error occurs when disabling
acceleration
|
Win7
|
|
4158848
|
RSTCLI 32/64 volume and disk display is not in a
delimited format - break from legacy RAIDCFG32/64 output format
|
Win7,Win7-64,Windows 2008,Windows 2008-64
|
|
3237067
|
BSOD when Roaming an 8.5 migrating Raid0 to Raid5
volume to 11.5 on Eaglelake
|
Win7-64
|
|
4158629
|
UI Accessibility: Unable to the move focus when a
parent label is expanded (Contents Tab list on the Help Page)
|
Windows 8 - 64
|
|
4158787
|
SMART IOCTLs fail on Windows 7
|
Win7
|
|
4158800
|
Locked disks are not properly displayed in the
RST UI.
|
Win7-64,Windows 8,Windows 8 - 64,Windows Server 8
- 64
|
|
4158860
|
Turning on and off caching on Cherryville fails
after 1-20 iterations
|
Windows 8 - 64
|
|
4158866
|
ROHI: Hot-inserting an SSD into the port of the
missing member disk of an accelerated R1 volume will allow the rebuild to occur.
Removing the remaining spindle disk after the rebuild finishes and then
removing acceleration erases the OS
|
Win7-64
|
|
4158868
|
Need UI automation identifiers, Verify and Repair
Scheduler
|
Win7-64
|
|
4158873
|
WHQL: SCSI Compliance LUNS failures (WHCK2.0
BLOCKING)
|
Win7,Win7-64,Windows 8,Windows 8 - 64,Windows
Server 8 - 64
|
|
4158875
|
Resizing the UI to its Smallest Size makes RAID
Volume Inaccessible In Win8
|
Windows 8,Windows 8 - 64,Windows Server 8 - 64
|
|
4158897
|
UI Verification and Repair Scheduler, Next
Scheduled Run Error
|
Win7-64
|
|
4158981
|
UI allows user to initiate a second migration
when a migration is already occurring; doing so induces an unknown error
|
Win7-64
|
|
4159009
|
UI: An unknown error occurs when creating RRT
volume from existing disk
|
Win7
|
|
4159045
|
UI displays different sizes for a selected SSD on
the “Enable Acceleration” screen
|
Win7-64
|
|
4159046
|
UI does not allow to use a SSD that is 18.6 GB to
accelerate
|
Win7-64
|
|
4159048
|
UI allows user to create an accelerated Single
Disk RAID0 volume that would violate the RAID volume-number limit; doing so
induces a UI hang, followed by an error message
|
Win7-64
|
|
4159086
|
Accelerate Change Mode actionable link present
when accelerated volume is in failed state
|
Windows 8 - 64
|
|
4159092
|
FUA writes to non-NCQ drives fail with sense
5/24/00 invalid field in CDB
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
4159101
|
RST11.5 - Sending LUN reset to the boot device
causes the device to go offline and fail demand IO
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
4159135
|
UI disallows acceleration via the Enable
Acceleration Window if the user first enters invalid characters into the
Custom cache size field and then selects a valid radio button
|
Win7-64
|
|
|
|
|
|
Resolved Issues in 11.5.0.1153 Beta
|
|
|
Reference No
|
Description
|
Affected OS's
|
|
|
4158980
|
EFI: ATAPI ROM Drive does not
enumerate
|
EFI
|
|
|
4158799
|
UEFI HII does not show which if the
port is external
|
EFI
|
|
4158543
|
Raid 10 array available to create 2nd
volume when not enough capacity exists
|
EFI
|
|
3237069
|
Legacy OROM UI incorrectly allows you to create a 3-disk RAID0
volume on a degraded RAID10 array
|
Other
|
|
3236896
|
RST HII EFI UI allows volume names using characters outside the correct
range
|
EFI
|
|
3236977
|
HII: Deselecting all non-array disks in Create Volume form
incorrectly leaves array disks unselectable
|
EFI
|
|
3236978
|
HII: switching between Recovery and non-Recovery RAID levels in
Create Volume form incorrectly enables/disables options
|
EFI
|
|
3236976
|
HII: Create Volume form incorrectly lists Recovery volume as
RAID option with existing RAID volume
|
EFI
|
|
3236938
|
UEFI HII Locked Recovery Disk shows Option To Enable Recovery
|
Windows 8 - 64
|
|
3236817
|
Legacy OROM uses memory location belonging to someone else to
read/write fast sync log data for RRT volume
|
Win7
|
|
3236838
|
HII: Performing Enable Recovery Disk Only after Performing Enable
Master Disk Only Doesn't do anything
|
EFI
|
|
3236832
|
HII: Synchronization type for RRT Volume Not Displayed In RAID
Volume Info Form
|
EFI
|
|
3236834
|
HII: Main Menu Form shows empty disk after performing reset disk
to non-RAID
|
EFI
|
|
3236727
|
RRT Volume Succeeds to Enable Recovery Disk When the Recovery
Disk is missing, and Fails to Enable Master.
|
EFI
|
|
4158966
|
OROM fails to create RAID volumes on specific HDDs.
|
None
|
|
4158771
|
OROM: CfgStatus = Unknown Status (1)
|
Windows 2008-64
|
|
3236209
|
Performance drop does not meet internal criteria
|
Win7-64
|
|
3235464
|
Installing
11.5 blocks functionality of Intel SSD Toolbox
|
Win7-64
|
|
3235595
|
SGPIO
Migration/Rebuild flashing doesn't resume after Locate button pressed
|
Win7
|
|
3235948
|
RST SRT
not honoring user's power plan
|
Win7-64
|
|
3236260
|
Driver
sends back faulty OROM version table after accelerating OS disk in Max mode
and rebooting
|
Win7-64
|
|
3236268
|
Driver
does not wait long enough for device to become ready per ATAPI 7
specification (341 secs)
|
Win7,Win7-64
|
|
3236414
|
Manage
Volume should display "Errors repaired/fixed" under Verification
details
|
Vista,Win7
|
|
3236506
|
RST
Caching SSD disk fail causes caching volume failure in RST UI.
|
Win7-64
|
|
3236594
|
Missing
text string on 11.5 UI Status Page while in AHCI mode.
|
Windows 8 - 64
|
|
3236599
|
Acceleration
status is always No Sync in the RST OROM after changing mode by the RST UI
|
Win7,Win7-64
|
|
3236605
|
Driver does
not provide RAID volume name to OS properties dialog, making it impossible to
distinguish which volume you are working with.
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
3236629
|
After
accelerating passthru disk, restarting, and
disabling acceleration, Windows cannot get the physical disk ID of the
previously accelerated disk
|
Windows 8,Windows 8 - 64
|
|
3236660
|
SRT: The
acceleration mode is not refreshed when hovering over a disk that has
undergone a recent mode-change
|
Win7-64
|
|
3236666
|
UI:HotPlugRecovery; Incorrect
Status of a missing recovery disk in continuous recovery mode
|
Windows 8 - 64
|
|
3236750
|
SRT:
incorrect status icon over the offline NVM drive
|
Windows 8
|
|
3236752
|
UI-
Revert changes to support Acceleration after hot-unplug and re-insert of SSD
|
Win7-64
|
|
3236777
|
RST UI gives
option to create 2,863,399,310 GB RAID volume
|
Windows 8
|
|
3236801
|
SRT:
Resumption from hibernation induces BSOD 0xD1 if we render a non-OS SDR0
disabled before the resumption occurs
|
Win7-64
|
|
3236808
|
UI
System Report lists hardware config as RAID mode while running in AHCI mode
|
Windows 8
|
|
3236810
|
RST11.5
- DRAM reduction - Reduce SrbExtension memory by
removing SGLs from SrbExtension
|
Windows 8,Windows 8 - 64
|
|
3236820
|
Hibernation:
The UI fails to refresh itself to reflect that disks have gone missing if
they are taken out after hibernating the system but before resuming from hibernation
|
Win7-64
|
|
3236842
|
Unable
to modify cache volumes when maximum volume count is reached and volumes
cannot be accelerated
|
Win7-64
|
|
3236852
|
Renaming
volume name of SSD cache volume exposes an additional disk "Unknown
SSD" with serial number "0Vulem0_001"
|
Win7-64
|
|
3236863
|
The UI
will fail to refresh itself to reflect a change of volume type if we change
the volume name from within the change type screen
|
Win7-64
|
|
3236866
|
A locked
member disk of R5 or R0 volume fails after OS is shutdown and then the disk
is unlocked.
|
Win7-64
|
|
3236887
|
UI: The
Create button will continue to be exposed to the user even if all 5
pass-through disks are marked as spares
|
Win7-64
|
|
3236888
|
UI:
Error message is shown when trying to create CVFD with dynamic disk
|
Windows 8 - 64
|
|
3236901
|
UI:
Unknown error occurred when deleting a volume with an Unlocked disk and
Locked disks
|
Windows 8 - 64
|
|
3236907
|
Windows
can corrupt data buffers for write requests shortly after they are issued any
time after a POWER IRP is issued
|
Win7-64
|
|
3236929
|
Creating
RST Caching volume after 30 minute wait can cause SSD to be marked as failed
in UI, USB port failure and Windows 8 to get stuck at green restarting screen
followed by BSOD driver_power_state_failure
|
Windows 8
|
|
3236932
|
Hot
Remove SSD after Re-insert the unplugged SSD the "Clear and reset disk
actionable link" is no longer valid
|
Win7-64
|
|
3236970
|
Window*
8 support in the 'Cache Device Properties' section of UI help
|
Win7-64,Windows 8,Windows 8 - 64
|
|
3237005
|
When a
SATA device is connected to an eSATA port, it does not show up in the
"Safely Remove Hardware Icon" list
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
3237030
|
RST 11.5
- ETW improperly calculates the reference LBA
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
3237050
|
SRT
Caching thrashes cache contents running specific test
|
Win7
|
|
3237054
|
Cache
placeholder EndDevice serial number needs to change
to reflect cache volume rename
|
Win7-64
|
|
3237057
|
Bad blocks
set on a member disk of R5D3 volume prevent the volume from successfully
rebuilding.
|
Win7-64
|
|
3237062
|
DPC
execution time assertion when resuming from sleep
|
Win7
|
|
3237097
|
Giving a
volume the same name (but with a different case-type) as a pre-existing
volume via the OROM UI causes the RST UI to fail to open
|
Win7-64
|
|
3237102
|
Disabling
disk data cache while a change type migration is in progress induces an
unknown error in the RST UI
|
Win7-64
|
|
3237143
|
SRT:
Change NVM Mode gives BSOD D1, Error or Hang
|
Win7-64
|
|
3237165
|
0x50/0x7E
BSOD occurs during Write Test.
|
Win7-64
|
|
3237167
|
Boot
Failure when ZPODD not supported and ZPODD attached.
|
Win7
|
|
3237169
|
UI
allows the creation of R5 and R10 volumes with incorrect strip sizes.
|
Windows 8,Windows 8 - 64
|
|
3237185
|
UI: High
ContrastTheme Drop Down Boxes under Accelerate and
Create Volume Difficult to Read
|
Windows 8 - 64
|
|
3237194
|
RST 11.5
and 12.0_Year of copyright should be 2012
|
Vista,Vista-64,Win7,Win7-64,Windows 2003,Windows
2003-64,Windows 2008,Windows 2008-64,Windows XP,Windows
XP-64
|
|
3237195
|
ZPODD
response to Get Event Status Notification doesn't indicate power on properly
|
Win7-64
|
|
3237243
|
RST 11.5
Balloon messages display in ENU after display language switched to CHT (Hong
Kong region) in MUI envr.
|
Vista,Vista-64,Win7,Win7-64,Windows 2003,Windows
2003-64,Windows 2008,Windows 2008-64,Windows XP,Windows
XP-64
|
|
3237248
|
UI
displays an incorrect serial number for the cache SSD in the acceleration
page after disabling acceleration on a maximized SDR0
|
Win7-64
|
|
3237249
|
On a
system with three disks connected, the UI will erroneously expose the option
to create either a recovery or a 2DR0 volume using a spare disk and the OS
disk
|
Win7-64
|
|
3237292
|
LPM -
Not honoring the user's registry keys when changing the default behavior
|
Win7-64
|
|
3237306
|
WHQL:
0xC9 BSOD when Driver Verifier enabled against iaStorF.sys (WHCK2.0 BLOCKING)
|
Win7,Win7-64
|
|
3237308
|
ZPODD
fails to resume file copy after S3/S4 resume
|
Win7
|
|
3237309
|
ZPODD
fails to function after S3/S4 resume then BSOD
|
Win7
|
|
3237311
|
ZPODD
feature no longer supports HotPlug/UnPlug
|
Win7
|
|
3237340
|
Duplicate
automation ID on UI Manage Volume page
|
Win7-64
|
|
3237353
|
RAID
Error and Warning Event IDs are set to Zero
|
Win7
|
|
3237356
|
IOCTL
signatures not correctly matched to IOCTL control codes
|
Vista,Vista-64,Win7,Win7-64,WinPE 3.0,Windows
2008,Windows 2008-64,Windows 8,Windows 8 - 64,Windows Media Center,Windows Server 8,Windows Server 8 - 64
|
|
4158542
|
System
will not boot with SRT enabled
|
Win7,Windows 8
|
|
4158585
|
Rebooting
to safe mode on a system RAID volume after a dirty shutdown induces BSOD
1E/7E/D1. Rebooting to safe mode under normal conditions induces a system hang
|
Win7-64
|
|
4158593
|
SRT:
0xC5 BSOD after installing driver and reboot with SSDs storage installed
|
Win7
|
|
4158599
|
RST 11.5
- Crashdump/hibernate driver allocates wrong memory
type
|
Windows 8,Windows 8 - 64,Windows Server 8,Windows
Server 8 - 64
|
|
4158661
|
IRST
11.5-UI-ENU-Drop down menu box too small to accommodate some translations in
one line of text.
|
Vista,Vista-64,Win7,Win7-64,Windows 2003,Windows
2003-64,Windows 2008,Windows 2008-64,Windows XP,Windows
XP-64
|
|
4158686
|
SRT11.5
- SRT No longer works and system will hang on first reboot
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
4158689
|
RST
11.5-UI-ENU+All languages-Inaccurate date format after Next scheduled run
|
Vista,Vista-64,Win7,Win7-64,Windows 2003,Windows
2003-64,Windows 2008,Windows 2008-64,Windows XP,Windows
XP-64
|
|
4158727
|
RST CLI 32/64
only displays manufacturer's name but not the model number at times/MN is
cutoff
|
Win7,Win7-64
|
|
4158751
|
RST
11.5-UI-HEB-and-ARA-the-'Verify and Repair Data Results' dialog is not
RTL-enabled
|
Vista,Vista-64,Win7,Win7-64,Windows 2003,Windows
2003-64,Windows 2008,Windows 2008-64,Windows XP,Windows
XP-64
|
|
4158752
|
RST 11.5-UI-FRA-the
banner in Windows title bar used for the 'Verify and Repair Data Results'
dialog is not wide enough for the title
|
Vista,Vista-64,Win7,Win7-64,Windows 2003,Windows
2003-64,Windows 2008,Windows 2008-64,Windows XP,Windows
XP-64
|
|
4158777
|
Partial
Cache Hit can cause D1 BOSD if discarded buffer is larger than Bit Bucket
|
Win7
|
|
4158794
|
UI will
allow the user to delete the system disk during a create volume from existing
RAID1 migration if the system disk is on port 1 and a data disk is on port 0
|
Win7-64
|
|
4158813
|
Cannot
accelerate using specific SSD
|
Windows 8 - 64
|
|
4158820
|
RST
11.5-UI-ENU+All languages-Inconsistent text 'hot insert' throughout project
|
Vista,Vista-64,Win7,Win7-64,Windows 2003,Windows
2003-64,Windows 2008,Windows 2008-64,Windows XP,Windows
XP-64
|
|
4158823
|
Disk
NEVER spins down after resuming from S3 is not meeting the requirement of 90%
|
Win7,Win7-64
|
|
4158855
|
BSOD
0x50 during boot in 11.5 to 11.0 downgrade scenario with SRT volume
|
Win7-64
|
|
4158857
|
Error
c0000102 {corrupt file} happens while restarting the system with RST caching
in max mode
|
Win7,Win7-64
|
|
4158888
|
TRIM IO for
some 3rd party SSDs fail causing RAID 0 volume to fail
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
4158904
|
Driver fails
to send standby immediate command before entering S4
|
Win7,Windows 8
|
|
4158942
|
Win8
TRIM is disabled due to missing Inquiry VPD Page B2
|
Win7,Win7-64,Windows 8,Windows 8 - 64,Windows
Server 8,Windows Server 8 - 64
|
|
4158948
|
0xD1
BSOD after resuming from S4(hibernation) with SDR0 in max mode
|
Win7-64
|
|
4159028
|
ReadCap16
completed with returned data length of 15 bytes
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
4159039
|
0xC4
BSOD (Driver_Verifier_detected_violation) during S3
cycles in win 8
|
Windows 8 - 64
|
|
3236830
|
Create
Volume From Disk (CVFD) causes the volume Degraded and the volume member
Failed
|
Windows 8 - 64
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resolved Issues in 11.5.0.1122 Alpha
|
|
|
Reference No
|
Description
|
Affected OS's
|
|
|
3236694
|
Cannot Boot with UEFI Rom On Cougar
Point Mobile Platform
|
EFI
|
|
|
3236542
|
HII Deleted Volume Appears on Screen
when hitting instead of "Goto Main Menu"
|
EFI
|
|
|
3236612
|
UEFI BlockIo.Write()
Fails I/O for LBAs On RAID 5 3 Disk Volume
|
EFI
|
|
|
3236415
|
BlockIo.Read() returns
incorrect return code for wrong MediaId entered
into function
|
EFI
|
|
|
3236571
|
UEFI HII allows user to select and create
an RRT Volume with 2 Masters or 2 Recovery Disks
|
EFI
|
|
|
3236433
|
RCfgSata.efi displays volume/disk
size with incorrect spacing
|
EFI
|
|
|
3236330
|
Smart Response Technology fails to
resume from hibernation after entering OROM>Acceleration Options and
sometimes causes BSOD 0050 & 0051
|
Win7-64
|
|
|
3236141
|
"Disk data cache" resets
to "enable" after resuming from S4/S5 in IRST UI
|
Win7,Win7-64
|
|
|
3235605
|
"Enable write caching on the
device" CheckBox is NOT checked by default on SSD_Space
|
Win7,Win7-64
|
|
|
3235686
|
Performing a clean restart after
creating a 2-drive RAID0 with a formerly accelerated disk sporadically
induces 0x9F BSOD
|
Win7-64
|
|
|
3235709
|
Cannot start 2nd volume migration:
"Not enough Resources"
|
Windows
8
|
|
|
3235955
|
RAID5 volume size is not 2 times the
size of the smallest drive
|
Windows
8 - 64
|
|
|
3235969
|
User Interface shows error message
when enabling Smart Response Technology with certain SSDs
|
Win7,Win7-64
|
|
|
3236209
|
Performance drop, no longer meets
QRC requirements, fails Integration Testing
|
Win7-64
|
|
|
3236373
|
Cannot F6 install to 3-drive RAID5
volume when using certain SSDs
|
Win7-64
|
|
|
3236396
|
Smart Response Technology enabled
(maximized) causes MobileMark '07 crash, BSOD 0xF4,
OS corrupted
|
Win7-64
|
|
|
3236414
|
Manage Volume should display
"Errors repaired/fixed" under verification details
|
Win7
|
|
|
3236436
|
User Interface Help does not notify
the user of how to increase partition/volume size after a migration
|
Win7-64
|
|
|
3236481
|
User Interface crashes when trying
to create new volume
|
Win7-64
|
|
|
3236510
|
Attempting to Accelerate a hot-inserted
HDD induces an Unknown error and causes the Accelerate button to disappear in
the user interface
|
Win7-64
|
|
|
3236569
|
Create Page Window allows disks to
be manipulated via the background and fails to refresh itself to reflect the
changes
|
Win7-64
|
|
|
3236573
|
BSOD 0xD1 sporadically observed when
initializing RAID 1 volume
|
Win7-64
|
|
|
3236588
|
RST Driver Metadata Not persistent
across reboots, Incomplete, or Missing on Raid Data Volumes.
|
Windows
8 - 64
|
|
|
3236602
|
Add an SSD to an Accelerated Volume,
Change Type
|
Win7-64
|
|
|
3236622
|
User Interface hover message;
"Status: Incompatible" display under the 'Proposed Configuration'
section of the 'Confirmed' step in the 'Create Volume' window
|
Windows
Server 8 - 64
|
|
|
3236623
|
No hover message is displayed over
the disks or the Volume icon in the 'Create Volume' in the 'Configure' page
|
Windows
8 - 64
|
|
|
3236639
|
WHQL: Hibernation S4 resume failures
on Vista/2008 RAID (WLK1.6 BLOCKING)
|
Windows
2008,Windows 2008-64
|
|
|
3236401
|
Driver prevents SSD from being used
as cache after hot-plugged and hot-inserted
|
Win7-64
|
|
|
|
|
|
|
|
|
|
|
Resolved Issues in 11.5.0.1118 Alpha
|
|
|
Reference No
|
Description
|
Affected
OS's
|
|
|
3235279
|
Accelerated pass-through data disk:
Error message pop-up in user interface when trying to use a different SSD to
Accelerate the disk after auto-transition Enhanced mode to OFF due to missing
Cache SSD
|
Win7, Win7-64
|
|
|
3235449
|
User interface should not allow the
increase size option of second volume of matrix array after deleting the
first volume
|
Win7-64
|
|
|
3235672
|
Initialize volume checkbox is not
checked and not grayed out
|
Windows8
|
|
|
3235685
|
Help update needed to align w/
string change to clarify "Reset to normal" vs. "Clear and
Reset"
|
Win7
|
|
|
3235773
|
After hot plugging a disk the user
interface still displays the disk as connected to the system
|
Win7-64, Win8-64
|
|
|
3235813
|
Ports with Optical Disk Drives
missing from user interface system report
|
Win7-64
|
|
|
3235832
|
An unknown error occur when change
type from 2 drive RAID0 to 3 drive RAID5
|
Win8-64
|
|
|
3235459
|
RCmpSata /? shows the
incorrect binary name
|
N/A
|
|
|
3235751
|
UEFI RcfgSata.efi Successfully
Accelerates an Invalid Smart Response Technology Volume with 2 SSDs in Max
mode.
|
N/A
|
|
|
3235910
|
Tray icon message erroneously opens
an instance of the user interface when it is clicked
|
Win7-64
|
|
|
3235935
|
User interface shows option for
creating a RAID volume with an accelerated drive
|
Win7-64
|
|
|
3235939
|
All languages-Rescan mouse-over text
is not localized
|
Win7,
Win7-64, Windows 2008, Windows 2008-64
|
|
|
3235945
|
Disk list not wrapped on Confirm
Volume Creation page
|
Win7,
Win7-64, Windows 2008, Windows 2008-64
|
|
|
3236029
|
Command Line Interface (CLI) claims
a disk for RAID even though the command failed
|
Win7-64
|
|
|
3236051
|
When trying to enable acceleration,
the disk selection screen full disk capacity, max 64 GB for the cache which
is not true all the time
|
Win7,
Win7-64
|
|
|
3236080
|
User Interface failed to offer the
"Change Type" option to migrate from 4 disk RAID10 to RAID5
|
Win7-64
|
|
|
3235034
|
Manage page displays incorrect
information after aborting a RAID creation after clicking volume in proposed
configuration graphic
|
Win7
|
|
|
3235173
|
Disabled HDD Lock Feature in BIOS
has no effect on user interface
|
Win7-64
|
|
|
3235588
|
Help-ENU-Missing colons after
certain items in Help glossary
|
Win7,
Win7-64, Windows 2008, Windows 2008-64
|
|
|
3235653
|
Help search page; second search causes
information to disappear
|
Windows
2008-64
|
|
|
3235656
|
Incorrect text string, 'Advanced',
appears on Status Page of RST user interface
|
Windows
2008-64
|
|
|
3007102
|
Disassociating help icon hover text
string incorrect
|
Win7
|
|
|
3235273
|
User Interface will not open with
unknown/incompatible drive
|
Win7-64
|
|
|
3235511
|
User Interface - String change
needed to clarify "Reset to normal" vs. "Clear and Reset"
|
Win7
|
|
|
3235533
|
DriverFeatures_HDDUnlock not getting set properly
|
Win7-64
|
|
|
3235552
|
Change power management feature to
ON for client driver build
|
Win7,
Win7-64
|
|
|
3235612
|
Clean up 11.5 stripe size warning
messages
|
Win7-64
|
|
|
3235065
|
A partial word search in the user interface
causes an error
|
Win7-64
|
|
|
3235221
|
Error message received when creating
a RRT OS volume
|
Win7-64
|
|
|
3235279
|
Accelerated pass-through data disk:
Error message pop-up in user interface when trying to use a different SSD to Accelerate
the disk after auto-transition Enhanced mode to OFF due to missing Cache SSD
|
Win7,
Win7-64
|
|
|
3235285
|
Cannot edit size of volume (RAID0,
RAID5, RAID10) with data on one of the disks
|
Win7-64
|
|
|
3235287
|
Incorrect 'Volume Creation Complete'
message for RRT OS volume
|
Win7
|
|
|
3235303
|
Acceleration icon does not show in
manage page after creation of accelerated RAID1 in user interface
|
Win7
|
|
|
3235322
|
Acceleration text missing from status
page after 'Clear and reset disk' is done
|
Win7
|
|
|
3235386
|
Rebuild progress not visible when
rebuilding volume to spare disk
|
Win7-64
|
|
|
3235321
|
Incorrect 'Current Status' icon and text
string when removing a SSD that was being used as a caching device
|
Win7
|
|
|
3235667
|
From the 'Select' page on the
'Create' page, you cannot select volume type using only keyboard functions
|
Windows 2008-64
|
|
|
3235669
|
Driver not setting System Disk cache
as missing/removed when SSD is hot plugged
|
Win7
|
|
|
3235682
|
RST-Caching: IRQL_LESS_NOT_EQUAL
BSOD is induced when resuming from hibernation after a dirty shutdown and
corresponding data flush on an Accelerated OS volume
|
Win7-64
|
|
|
3235685
|
Help update needed to align w/
string change to clarify "Reset to normal" vs. "Clear and
Reset"
|
Win7
|
|
|
3235718
|
CLI needs to disable all server
related switches/and references to server in Help
|
Win7
|
|
|
3235768
|
Unable to open handle and get serial
number of volumes
|
Win7, Win7-64, Win8, Win8-64
|
|
|
3235849
|
Selecting simple create will crash
the user interface
|
Win7-64, Windows 2008-64
|
|
|
3235129
|
0x7E BSOD sporadically seen during RAID
operations if the volume name is 16 characters
|
Win7, Win7-64, Windows 2008-64
|
|
|
3235277
|
Accelerated RAID Volume: Clicking
'Disassociate' link pops-up Error message in UI after Acceleration
auto-transition from Enhanced to Off due to SSD being removed
|
Win7,Win7-64
|
|
|
|
|
|
|
|
Known Issues in 11.5.0.1207 PV
|
|
|
Reference No
|
Description
|
Affected OS's
|
|
4159125
|
10x increase in number of drive
spin-ups with 11.5 driver vs. 11.0
|
Win7
|
|
4160021
|
AOAC: Black screen w/mouse curser
after SDR0 with reboot
|
Windows 8 - 64
|
|
4159040
|
AOAC: Critical_process_died
BSOD happens in Win 8 while restarting after creating SDR0 and Data volume
|
Windows 8 - 64
|
|
4160046
|
AOAC: Spin Down failed to hit 90%
|
Win7-64
|
|
4160081
|
Boot volume identifiers modifications
to meet Microsoft activation requirements
|
Win8, Win8 - 64
|
|
4159992
|
Accelerating with second SSD after
rebooting and disabling acceleration induces unknown error
|
Win7-64
|
|
4159142
|
Activate LED action link on the UI
manage disk page is always available regardless user disable/enable the
option in BIOS (both RAID and AHCI mode)
|
Win7
|
|
4160051
|
Attempting to accelerate with <=64
GB SSD fails and exposes SDR0 after hot-removing >=64 GB SSD
|
Win7-64
|
|
4160101
|
BSOD 0xD1 during boot
|
Win7
|
|
4160036
|
BSOD D1 Driver_irql_not_less_or_equal
IastorA.sys while running S4 cycles with RST Caching
|
Win7-64
|
|
4159432
|
Browse back from "Online
Support" not functioning properly
|
Win7-64,Windows 8 - 64
|
|
4160102
|
CLI allows user to create SRT cache
volume with boot drive
|
Windows 8 - 64
|
|
4159766
|
Cache SSD goes offline when unlocked
after hot plug instead of becoming a Dangling Cache with online extra space
volume
|
Windows 8 - 64
|
|
3237310
|
Create button does not
disappear/reappear properly when hot plugging all drives but os drive when the window is not in focus
|
Win7-64
|
|
4158826
|
Current SRT idle cleaning
inefficient, too aggressive, causes potential performance and long term
usability issues
|
Win7,Win7-64,Windows 8,Windows 8 - 64
|
|
4158856
|
Deleting a Volume while Rebuilding
renders ROHI disk unusable
|
Win7-64
|
|
4159427
|
Deleting a non-OS matrix volume while
it is migrating marks added disks as unknown
|
Win7-64
|
|
4159855
|
Disabling acceleration on the OS disk
after going through change mode cycles causes the UI to display an incorrect
info on the disk graphic of Port 0 OS on the Status Page.
|
Win7-64
|
|
4160093
|
Disabling acceleration with
Cherryville Production SSDs induces unknown error and erratic UI behavior
|
Win7-64
|
|
4159932
|
Disk order is reverse in device
manager after SRT is enabled.
|
Windows 8 - 64
|
|
4160048
|
Volume is in verify and fix not
normal after CVFD G2TB
|
Windows 8 - 64
|
|
3234971
|
Enlarging the UI window by double clicking
the top bar causes the user screen to change
|
Win7-64,Windows XP-64
|
|
4159713
|
F6 install driver is not working when
installing Windows 8 on a dirty disk
|
Windows 8,Windows 8 - 64
|
|
4159765
|
HDD goes Offline instead of re-associating
with its dangling cache when unlocked
|
Windows 8 - 64
|
|
4159520
|
System hangs when a cached disk that
is a part of a R1 volume is unlocked
|
Windows 8 - 64
|
|
4159107
|
Hot-unplugging the SSD after switching
mode from maximized to enhanced leaves the SSD marked as either a failed or a
normal disk in the UI; resetting the absent disk to available and
reaccelerating the system disk induces a BSOD or a system hang
|
Win7-64
|
|
4159769
|
HyperX Kingston SSD's are disappearing or not being properly
enumerated in the OROM.
|
Windows 8, Windows 8 – 64, Win7, Win7
x64
|
|
4159725
|
IAStorDataMgrSvc.exe CPU utilization
continues to stay at >0.6% during idle
|
Windows 8 - 64
|
|
3237333
|
RST 11.5-Create Volume... Window
jumps in the lower right corner when opened. Next and Cancel Buttons are not
visible unless moved manually. Only occur if main UI is in full maximized
view.
|
Vista,Vista-64,Win7,Win7-64,Windows
2003,Windows 2003-64,Windows 2008,Windows 2008-64
|
|
4159810
|
RST UI sporadically crashes while
running S4 cycles with RST Caching
|
Windows 8 – 64
|
|
4159041
|
RST UI does not display the correct
port number while hot plugging or port swapping the ports during S3
|
Win7,Windows 8 – 64
|
|
4160109
|
ISM abort when coalescing partial NV
cache hit
|
Win7
|
|
3235584
|
Information does not display inside
UI Page when changing the windows theme in Win8.
|
Windows 8 - 64
|
|
4159435
|
Introduction topic page actionable links
does not refresh topic page
|
Windows 8 - 64
|
|
3237292
|
LPM - Not honoring the user's
registry keys when changing the default behavior
|
Win7-64
|
|
4159990
|
Locking then unlocking a failed member
disk of a RAID volume causes the disk to be marked Normal
|
Windows 8 - 64
|
|
4160009
|
PC freeze and sometimes BSoD occur after resuming from sleep.
|
Win7-64,Windows 8 - 64
|
|
4160206
|
Optical Drive will auto-eject after
system resumes from Standby with SSD HD
|
Windows 8 - 64
|
|
4160209
|
HDD device name shows wrong in device
manager after enabling acceleration via RST UI
|
Windows 8 - 64
|
|
4160079
|
0xF4 BSOD occurs while checking disk
spin status
|
Win7 - 64
|
|
4160137
|
Running S4 stress test will cause
system (AHCI mode) black screen w/o backlight
|
Windows 8, Windows 8 - 64
|
|
4159082
|
RAID 5 initializes without user interaction
when only 3 disks are in the volume
|
Win7-64
|
|
4160131
|
RSTCLI allows deletion of ONLY the
data volume; UI will then allow creation of an unknown volume
|
Win7-64
|
|
4159896
|
Re-accelerating OS after setting
cache-vol name to SDR0 vol-name
causes BSOD 7E upon reboot
|
Win7-64
|
|
3236644
|
Driver fails to enumerate an
accelerated disk or volume during an F6 install if a system disk is already
attached to the system
|
Win7-64
|
|
3236964
|
NVM mode fails between 20 and 400 changes
after multiple run
|
Windows 8,Windows 8 - 64
|
|
3236972
|
SSD_SPACE volume is online when
roamed to higher port on system with existing cache pair.
|
Windows 8 - 64
|
|
4160013
|
SanDisk U100 32GB SSD not associated
with cache after enabling acceleration and rebooting.
|
Windows 8 - 64
|
|
4160183
|
ATA PassThrough
commands READ DMA 256 Sector and READ DMA EXT 256 Sector fail
|
Win7-64, Windows 8 - 64
|
|
4160037
|
Switching to >64 GB SSD from a
<64 GB SSD after selecting custom cache size of 64 GB retains error
|
Win7-64
|
|
4160001
|
The system hangs when activating the accelerometer
feature upon entering into S4/S5
|
Windows 8,Windows 8 - 64
|
|
4159906
|
UI allows acceleration with a custom
cache even when the custom field is grayed out
|
Win7-64
|
|
4158746
|
UI allows drives to be unlocked when HDD
Unlock is disabled in the BIOS BCFS options.
|
Win7-64
|
|
3237251
|
UI allows renaming a volume to the
name of the hidden, accelerated SDR0 volume, which induces an unknown error
|
Win7-64
|
|
4159542
|
UI allows user to create SRT volume without
enough space for metadata
|
Windows 8 - 64
|
|
4159774
|
UI displays cache missing warning
when all disks are normal and non-accelerated
|
Windows 8 - 64
|
|
3236749
|
UI does not correctly display the
port type during the hot-plug cycle of an external port.
|
Windows Server 8 - 64
|
|
3237250
|
UI notifications will sporadically
expose the presence and name of the supposedly hidden accelerated SDR0 volume
|
Win7-64
|
|
4159843
|
UI shows incorrect transition status
if we perform an unclean shutdown/restart during cache transition
|
Win7-64
|
|
4158726
|
UI unknown error after accelerating
OS drive, rebooting, and disabling acceleration
|
Win7-64,Windows 8 - 64
|
|
4158578
|
UI: "Test status: In
Progress" never appears when 'SMTP Host*:' is Incorrect
|
Win7-64,Windows 2008-64,Windows 8 -
64
|
|
3236947
|
UI: Accelerate button does not
disappear/reappear properly when performing hot plug on SSD
|
Windows 8
|
|
4159764
|
Volume HDD goes offline when unlocked
|
Windows 8 - 64
|
|
4159768
|
Volume does not lock when HDD is hot
plugged and locked
|
Windows 8 - 64
|
|
4159969
|
WBC enabled when creating the second
volume of a matrix array with OS flushing enabled.
|
Win7-64
|
|
3237042
|
WHQL: 0xCE BSOD during DP CPU Hot Add
simulation on Server 2008 R2 (WLK1.6 BLOCKING)
|
Windows 2008-64
|
|
3235486
|
When quick switching between Admin
and user accounts, the UI manage/status window loses data.
|
Windows Server 8 - 64
|
|
4158991
|
Win8 PPT Desktop hangs when trying to
Restart with 4 Samsung HDDs
|
Windows 8 - 64
|
|
|
|
|