Engenius ESR750H Router Firmware for Linux

Specifications:

Hardware Specifications
- Physical Interface
- Antenna Connector
- Power Switch
- Power Jack
- Gigabit LAN Ports
- Gigabit WAN Port
- USB Sharing Port
LED’s Status
- WPS (Press 1-to 5 seconds to activate the router’s Wi-Fi
- Protected Setup (WPS) feature.
- (Press 6-to-10 seconds to reboot the router)
- (Press up to 20 seconds to reset the router to factory
- default)
- Power Status
WLAN
- Wired and Wireless Connection

RF SPECIFICATIONS
Frequency Band
- .400~2.484 GHz (11b/11g/11n) and 5GHz (11a/11n)
Modulation Technology
- OFDM: BPSK, QPSK, 16-QAM, 64-QAM
- BPSK, DQPSK, CCK
Operation Channels
- 11 for North America, 13 for Europe, 14 for Japan
Receive Sensitivity
(Optimal) -90 dBm
Available Transmit
Power (Optimal) 20dBm
Antennas
- Detachable external 5 dBi antennas and 3 internal 3.5dBi antennas
Firewall
- Block ICMP
SPI (Static Packet Inspection)
- DoS Attack Blocking
- Rule Based (IP Address Ranges, Port Ranges & Schedule)
- DMZ (Demilitarized Zone) Host Support
VPN
- L2TP & PPTP VPN tunneling
- VPN pass-through (PPTP, L2TP, IPSEC)
Wireless Security
- WPA
- WPA2
- .1x Authenticator
- Hide SSID in beacons
- WPS
- Auto Channel Selection
- QoS WMM

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.