ECS A880GM-M6 (V1.0) JMicron JMB361/362/363 Controller Driver

CPU
- Socket AM3 socket for AMD Phenom II processors
- Support 125W Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Note: This board supports CPU up to 125W TDP ; you can refer to AMD website to check your CPU.

CHIPSET
- AMD 880G & AMD SB710
- North Bridge: AMD 880G
- South Bridge: AMD SB710

GRAPHICS
- On Chip(AMD 880G-based with ATI Radeon HD4250 graphics )
- Integrated DirectX10.1 graphics processor
- Share Memory: Maximum up to 512MB

MEMORY
- Dual-channel DDR3 memory architecture
- 4 x 240-pin DDR3 DIMM socket support up to 32 GB
- Support DDR3 up to 1600(OC)/1333/1066 DDR3 SDRAM
- *(Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 8GB)
- *(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)

EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot
- 2 x PCI Express x1 slots
- 1 x PCI slot

STORAGE
- Support by AMD SB710
- 6 x Serial ATAII 3.0Gb/s devices
- 2 x eSATAII 3.0Gb/s devices
- RAID0, RAID1, RAID10 configuration

AUDIO
- Realtek ALC 888S supports 8-channel HD audio
- Compliant with HD audio specification

LAN
- RealTek 8111DL Gigabit Fast Ethernet

REAR PANEL I/O
- 1 x D-sub(VGA)
- 1 x HDMI Port
- 1 x DVI Port
- 1 x RJ45 LAN connector
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 1 x optical S/PDIF Out connector
- 1 x IEEE 1394 port
- 2 x e-SATA ports
- 6 x USB ports

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin ATX 12V connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin PWR_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x Power on button
- 1 x Reset button
- 1 x IDE connector
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x Clear CMOS button
- 1X Power on LED (Green light)
- 1X Stand by LED (Red Light)
- 6 x Serial ATA 3Gb/s connectors
- 3 x USB 2.0 headers support additional 6 USB ports
- 1 X onboard Buzzer
- 1 x 7S-LED Display

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support eBLU
- Support over-clocking
- Support eDLU
- Support eJIFFY
- Support eOC
- Support ECS M.I.B II Utility
- CPU voltage adjustable
- Memory voltage adjustable
- NB Chipset Voltage Adjustable
- SB Chipset Voltage Adjustable
- HT Voltage Adjustable
- External Clock Adjustable
- Multiple Frequency Adjustable

FORM FACTOR
- Micro-ATX Size, 244mm*244mm

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.