ECS A990FXM-A (V1.0) Marvell 91xx SATA 6G Driver 1.2.0.1002

CPU
- Support AM3+ 32nm FX-Series processors
- Support AM3 socket for AMD Phenom II processors
- Support 140W Phenom II X8 processors
- AMD Cool 'n' Quiet Technology
- High-performance HyperTransport 3.0 CPU Interface
- Support transfer rate up to 5200 mega-transfers per second
- Note: This board supports CPU up to 140W TDP only; you can refer to AMD website to check your CPU.

CHIPSET    - AMD 990FX & AMD SB950
- North Bridge: AMD 990FX
- South Bridge: AMD SB950

MEMORY
- Dual-channel DDR3 memory architecture
- Support DDR3 up to 2133(OC)/1866/1600/1333/1066 DDR3 SDRAM
- 4 x 240-pin DDR3 DIMM socket support up to 32GB per one DIMM support 8GB

EXPANSION SLOT
- 3 x PCI Express Gen 2.0 x16 slots
- 1 x PCI slot
- 2 x PCI Express x1 slots

STORAGE
- Support by Marvell 9128
• 6 x Serial ATA 6.0Gb/s devices
• 2 x eSATA 6.0Gb/s ports supporting external SATA 6.0Gb/s devices
- 1 x IDE channel support 2 Ultra DMA133/100/66 devices

AUDIO
- Realtek ALC892 8-Ch High Definition audio CODEC
- Compliant with HD audio specification

LAN
- Dual RealTek RTL8111E Gigabit Fast Ethernet Controllers with Teaming
- Realtek 8105E 10/100 Lan(Optional)

REAR PANEL I/O
- 1 x PS/2 keyboard/mouse combo port
- 1 x Clear_CMOS button
- 1 x Bluetooth
- 8 x USB 2.0 ports
- 2 x RJ45 LAN connectors
- 2 x eSATA 6.0Gb/s ports
- 2 x USB 3.0 ports compatible to both USB 3.0/2.0 devices (blue)
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 1 x optical S/PDIF Out connector

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x USB 3.0 header supports additional 2 USB 3.0 Ports
- 1 x 8-pin ATX 12V Power Connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin SYS_FAN connector
- 1 x 3-pin PWR_FAN connector
- 1 x Front panel audio header
- 1 x Front panel switch/LED header
- 1 x Buzzer
- 1 x SPDIF out header
- 1 x 7S-LED Display
- 6 x Serial ATA 6Gb/s connectors
- 1 x Clear CMOS header
- 1 x PWR button/ 1 x RST button
- 1 x IDE connector

SYSTEM BIOS
- AMI BIOS with 32Mb SPI ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Audio, LAN, can be disabled in BIOS
- F7 hot key for boot up devices option

FORM FACTOR
- ATX Size 305mm*244mm

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if  installed  driver not complete.