Gigabyte GA-990FXA-UD3 (rev. 1.2) 3TB+ Unlock Utility

CPU
AM3+ Socket:
- Support for AMD AM3+ FX processors
- Support for AMD AM3 Phenom II processors / AMD Athlon II processors

Hyper Transport Bus
- 5200 MT/s

Chipset   
- North Bridge: AMD 990FX
- South Bridge: AMD SB950

Memory   
- 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory (Note 1)
- Dual channel memory architecture
- Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules (Note 2)

Audio   
- Realtek ALC889 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for Dolby Home Theater
- Support for S/PDIF Out

LAN
- 1 x Realtek RTL8111E chip (10/100/1000 Mbit)

Expansion Slots   
- 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) (Note 3)
- 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2)
- 2 x PCI Express x1 slots
- 1 x PCI slot

Multi-Graphics Technology   
- Support for 2-Way AMD CrossFireX and NVIDIA SLI technology (PCIEX16_1, PCIEX16_2)

Storage Interface
South Bridge:
- 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID5, RAID 10 and JBOD

JMicron JMB363 chip:
- 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel supporting up to 2 SATA 3Gb/s devices
- Support for RAID 0, RAID 1, and JBOD

USB South Bridge:
- Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, including 2 eSATA/USB Combo connectors, 6 ports available through the internal USB headers)

2 x Etron EJ168 chips:
- Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)

IEEE 1394
VIA VT6308 chip:
- 2 x IEEE 1394a ports on the back panel

Internal I/O Connectors   
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 6 x SATA 6Gb/s connectors
- 1 x CPU fan header
- 2 x system fan headers
- 1 x power fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 3 x USB 2.0/1.1 headers
- 1 x USB 3.0/2.0 header
- 1 x Trusted Platform Module (TPM) header
- 1 x serial port header
- 1 x clearing CMOS jumper

Back Panel Connectors   
- 1 x PS/2 keyboard/mouse port
- 1 x optical S/PDIF Out connector
- 6 x USB 2.0/1.1 ports
- 2 x USB 3.0/2.0 ports
- 2 x IEEE 1394 ports
- 2 x eSATA/USB Combo connectors
- 1 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller   
- ITE IT8720 chip

H/W Monitoring   
- System voltage detection
- CPU/System temperature detection
- CPU/System/Power fan speed detection
- CPU overheating warning
- CPU/System/Power fan fail warning
- CPU/System fan speed control (Note 4)

BIOS   
- 2 x 32 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features   
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress BIOS Rescue
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune (Note 5)
- Support for Easy Energy Saver
- Support for Smart Recovery
- Support for Auto Green
- Support for ON/OFF Charge
- Support for Cloud OC
- Support for 3TB+ Unlock
- Support for Q-Share

Bundle Software   
- Norton Internet Security (OEM version)

Form Factor   
- ATX Form Factor; 30.5cm x 24.4cm

Notes

Note 1. Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.

Note 2. To support a DDR3 1866 MHz (and above) memory, you must install an AMD AM3+ CPU first.

Note 3. For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.

Note 4. Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.

Note 5. Available functions in EasyTune may differ by motherboard model.

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.