Gigabyte GA-P55-S3 (rev. 2.0) SATA2 Preinstall Driver 1.17.54.1

Chipset    1. Intel H55 Express Chipset






Audio1. Realtek ALC888B codec2. High Definition Audio3. 2/4/5.1/7.1-channel


Expansion Slots    1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)(The PCIEX16 slot conforms to PCI Express 2.0 standard.)2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)3. 1 x PCI Express x1 slot4. 4 x PCI slots


Storage Interface Chipset:1. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices


Internal I/O Connectors    1. 1 x 24-pin ATX main power connector2. 1 x 4-pin ATX 12V power connector3. 6 x SATA 3Gb/s connectors w1 x CPU fan header4. 2 x system fan headers5. 1 x power fan header6. 1 x front panel header7. 1 x front panel audio header8. 2 x USB 2.0/1.1 headers9. 1 x clearing CMOS jumper






I/O Controller    1. iTE IT8720 chip






 





Unique Features    1. Support for @BIOS2. Support for Q-Flash3. Support for Xpress BIOS Rescue4. Support for Download Center5. Support for Xpress Install6. Support for Xpress Recovery27. Support for EasyTune8. Support for Auto Green9. Support for ON/OFF Charge  10. Support for Q-Share


Form Factor    1. ATX Form Factor; 30.5cm x 19.0cm
It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.