OCZ Toolbox Firmware Updater

Fixes:
- Modified Identity data display
- Fixed Smart data display for power fail backup attributes
- Added BIOS update for Hybrid drive

Known Issues:
- Update Firmware feature prohibited for primary drives with 1500 & 2000 controllers
- Intel RST Driver 10.1.0.1008 prohibits SSD detection

The OCZ Toolbox Firmware Updater will allow you to update the firmware version to 2.15.

Issues resolved since version 2.13:
- Fixed a rare condition that may cause Windows Blue Screen error when the primary configured drive woke up from either a SATA slumber mode or S3/S4 modes
- Fixed a rare condition that may cause Windows Blue Screen error when the drive was 
configured as primary with OS installed
- Fixed a corner-case issue that may cause the drive to stutter or Windows freezing screen 
when a media read error occurred
- Further improved robustness of Secure Erase operation to prevent possible low-level data 
structure corruption
- Significantly improved TRIM handling to enhance system stability

Known open issue:
- Formatting a RAID1 volume takes longer than expected with PMC-Sierra BR-8 HB

Notes:
- SSD Firmware Updates and Tools for OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3, RevoDrive 3 and RevoDrive 3 X2
- Please do not update firmware unless absolutely necessary. Firmware updates may result in loss of user data and we recommend you back up your data before updating the firmware.
- Updating the firmware from the toolbox is not supported when Windows is running off the drive you are trying to update.

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.