AOpen DE5100 Intel Display Driver for XP x64

Fixes:
- When Hotplugging the Lenovo L2321X DP panel the CUI lists 2 modes (6x10 and 9x10 ) which are not able to be applied
- Call of Duty - Black Ops - A Driver crash or BSOD can occur during the game play
- While in extended display mode if you change the primary display rotation to 90 or 270 Degree There is only one display mode resolution available for the secondary display
- 1280x1024/1280x960 can not be selected when attached to a VGA monitor(max res:1600x900)
- LVDS Panel shows a white horizontal line of garbage in the center of the screen after changing the resolution
- Certain DirectX samples - Switchblade would cause the system to BSOD
- In the case of Dual display with certain DP panels one of the displays would blank-out on re-boot
- BSOD(0x19) while hot-docking system with two digital ports connected to docking station
- PC Game-Serious Sam; While playing this game; the system would sporadically BSOD
- The Display resolution 1280x1024 is shown twice in CUI after setting 16bbp color.
- PC Game- Brink; performance was slightly lower
- When using a VGA display and 16BPP not all supported RR are listed as expected
- Device name was being displayed as "Intel HD Graphics 3000" for 3rd generation Intel Core Processor Family
- PC Benchmark - 3D Mark2000 was unable to execute correctly
- Display modes and resolutions were not being persisted correctly.
- When setting a Resolution Mode there is a mismatch in the modes displayed in CUI & OS Page. These are different
- Slight flicker was observed on certain manufacturer's LVDS panels during display mode switching
- The adapter string in OS properties Page and "Processor Graphics in Use" in CUI shows as "Intel (R) HD Graphics" instead of "Intel HD Graphics 4000" in GT2 Production CPU

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.