ECS A890GXM-A (V1.0) ATI Chipset Driver

CPU
- Socket AM3 socket for AMD Phenom II processors
- Support 125W Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Support transfer rate up to 5200 mega-transfers per second
- Note: This board supports CPU up to 140W TDP only; you can refer to AMD website to check your CPU.

CHIPSET
- AMD 890GX & AMD SB850
- North Bridge: AMD 890GX
- South Bridge: AMD SB850

GRAPHICS
- On Chip (AMD 890GX-based with ATI Radeon HD4290 graphics )
- Integrated DirectX10.1 graphics processor
- Share Memory: Maximum up to 512MB
- AMD SidePort Memory : DDR3-1333 (64Mx16=128MB)

MEMORY
- Dual-channel DDR3 memory architecture
- 4 x 240-pin DDR3 DIMM socket support up to 32 GB
- Support DDR3 up to 1800(OC)/1600(OC)/1333/1066 DDR3 SDRAM
- *(Due to the DRAM maximum size is 4GB at present, the memory maximum size we have tested is 16GB)
- *(Due to AMD CPU spec limitation, memory OC figure (1600+) is not guaranteed, please refer to Memory QVL for more information)

EXPANSION SLOT
- 3 x PCI Express Gen 2.0 x16 slots
- 2 x PCI Express x1 slots
- 1 x PCI slot
- *The third PCIEX16 only support bandwidth x4

STORAGE
- Support by AMD SB850
- 5 x Serial ATAIII 6.0Gb/s devices
- RAID0, RAID1, RAID5, RAID 10 configuration
- 1 x eSATA

AUDIO
- Realtek ALC892 8-Ch High Definition audio CODEC
- Compliant with HD audio specification

LAN
- Dual Realtek 8111DL 10/100/1000 Fast Ethernet Controller

REAR PANEL I/O
- 1 x D-sub(VGA)
- 1 x HDMI Port
- 1 x DVI Port
- 1 x Display port
- 2 x RJ45 LAN connectors
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 1 x optical S/PDIF Out connector
- 1 x Clear_CMOS button
- 1 x eSATA
- 6 x USB ports

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 8-pin ATX 12V Power Connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin PWR_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x Power on button
- 1 x Reset button
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x 4-pin power connector for VGA card
- 1 x Clear CMOS header
- 5 x Serial ATAIII 6Gb/s connectors
- 4 x USB 2.0 headers support additional 8 USB ports
- 1X Stand by LED (Red Light)
- 1X Power on LED (Green light)
- 1 x Chassis intrusion header

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support over-clocking
- Support eJIFFY
- Support Page Up clear CMOS Hotkey
- Support ECS M.I.B III Utility
- CPU voltage adjustable
- Memory voltage adjustable
- NB Chipset Voltage Adjustable
- HT Voltage Adjustable
- External Clock Adjustable
- Multiple Frequency Adjustable

FORM FACTOR
- ATX Size 305mm*244mm

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.