ECS H57H-MUS (V1.0A) Intel Chipset Driver

CPU
- LGA1156 socket for latest Intel Core i7 / Core i5 / Core i3 high-end desktop processors
- DMI 2.5GT/s

CHIPSET
- Intel H57 Express Chipset

MEMORY
- Dual-channel DDR3 memory architecture
- 4 x 240-pin DDR3 DIMM socket support up to 16GB
- Support DDR3 1333/1066 SDRAM

EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot
- 1 x PCI Express x4 slot
- 1 x PCI Express x1 slot
- 1 x PCI slot

STORAGE
- Support by Intel H57
- 6 x Serial ATAII 3.0Gb/s devices
- Support by JMicron JMB360
- 1 x eSATA

AUDIO
- Realtek ALC892 8-Ch High Definition audio CODEC
- Compliant with HD audio specification

LAN
- Dual RealTek 8111DL Gigabit Fast Ethernet with Teaming
REAR PANEL I/O    - 1 x D-sub(VGA)
- 1 x HDMI Port
- 1 x DVI Port
- 2 x RJ45 LAN connectors
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 1 x optical S/PDIF Out connector
- 1 x eSATA
- 8 x USB ports

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 8-pin ATX 12V Power Connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin PWR_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x Power on button
- 1 x Reset button
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x Clear CMOS button
- 1X Power on LED (Green light)
- 1X Stand by LED (Red Light)
- 6 x Serial ATA 3Gb/s connectors
- 3 x USB 2.0 headers support additional 6 USB ports
- 1 X onboard Buzzer
- 1 x Chassis intrusion header

SYSTEM BIOS
- AMI BIOS with 64Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support over-clocking
- Support eJIFFY
- Support ECS M.I.B III Utility

FORM FACTOR
- Micro-ATX Size, 244mm*244mm

Bundle
- U3N2 and S6M2(USB 3.0 and SATA 6Gb/s Add-on Card)


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.