MSI K9A2 Neo-F ATI System Drivers

CPU
- AMD Phenom/Athlon/Sempron CPU.

Hyper Transport Bus
- HyperTransport 3.0 supporting speed up to 5200MT/s
- AM2 CPU supports HyperTransport 1.0/2.0
- AM2+ CPU supports HyperTransport 3.0

Chipset
- AMD 770 and SB600 Chipset

Main Memory
- Supports Dual DDR2 533/667/800/1066 (1066 for AM2+ only)
- 4 DDR2 DIMMs (240pin / 1.8V)
- Supports a maximum memory size up to 8GB.

Slots
- 1 PCI Express x16 slot (PCI Express Bus SPEC V2.0 compliant)
- 2 PCI Express x1 slot
- 2 PCI slots, support 3.3V/ 5V PCI bus Interface.
- One IDE port by AMD SB600
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
- Can connect up to two IDE devices

On-Board SATA
- 4 SATA II (1~4) ports by AMD SB600
- 1 eSATA port by Silicon Image Sil3531 (optional)
- Supports storage and data transfers at up to 3Gb/s

RAID Function
- SATA II 1~4 support RAID 0, 1 and 0+1 mode by AMD SB600
 MSI Reminds You...
- The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

On-Board IDE
- SATA, SATA2, eSATA

Audio
- Chipset integrated by Realtek ALC888
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
- Realtek PCI-E GbLAN controller 8111B
- Integrated Fast Ethernet MAC and PHY in single chip
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
- Compliance with PCI-Express Bus specification v1.0a

LAN
- Chipset integrated by VIA VT6308P
- Transfer rate is up to 400Mbps
 
IEEE1394 / FireWire
- optional

Internal I/O Connectors
- ATX 24-pin power connector
- ATX 4-pin 12V CPU power connector
- CPU / System x 2 FAN connectors
- CD-in connector
- Front panel audio connector
- Front panel connector
- Chassis intrusion switch connector
- 3 x USB 2.0 connector support additional 6 ports
- 1 x Floppy disk drive connector
- 4 x Serial ATA II connectors
- 1 x ATA133 IDE connector
- Clear CMOS jumper
- 1 x SPDIF-out header (optional)
- 1 x IEEE1394 connector support additional 1 port (optional)
- 1 x TPM module header (optional)
MSI Reminds You...
- The floppy disk cable will be optional.

Back Panel I/O Ports
- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 1 x Serial port
- 1 x 6 in 1 audio jack
- 4 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x eSATA port (optional)
- 1 x IEEE1394 Port (optional)

Dimension
- 30.5cm(L) x 22.0cm(W) ATX Form Factor 


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.