MSI NF725GM-P31 Nvidia Chipset Driver 15.56 for Vista, Win7

CPU
• Support AMD Phenom II X3/ X4 & Athlon X2/ X3/ X4 CPU in the AM3 package
Please refer to CPU Support for compatible CPU; the above description is for reference only.

Hyper Transport Bus
• HyperTransport 1.0 supporting speed up to 2000MT/s

Chipset
• NVIDIA GeForce 7025 & nForce 630a
 
Main Memory
• Supports Dual Channel DDR3 800/1066/1333
- 2 DDR3 DIMMs (240pin / 1.5V)
- Supports a maximum memory size up to 16GB.
 
Slots
• One PCI Express 1.0 x16 slot.
• One PCI Express 1.0 x1 slot.
• One PCI slot (support 3.3v/5v PCI bus interface).
 
On-Board IDE
• One IDE port by NVIDIA GeForce 7025
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
- Can connect up to two IDE devices

On-Board SATA
• Four SATA II ports by NVIDIA GeForce 7025
- Supports storage and data transfers at up to 3Gb/s

RAID Function
- SATA II 1~4 supports RAID 0, 1, 5, 10 mode by NVIDIA GeForce 7025
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

Audio
• Chipset integrated by Realtek ALC887
- Flexible 7.1-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
 
LAN
• Supports 10/100 Fast Ethernet by Realtek 8105E
 
Internal I/O Connectors
- ATX 24-pin power connector
- 4-pin ATX 12V power connector
- CPU x1 / System x1 FAN connectors
- CD-in connector
- 4 x SATA II connectors
- 1 x ATA133 connectors
- 2 x USB 2.0 connectors
- SPDIF-Out connector
- Front panel connector
- Front panel audio connector
- Chassis intrusion switch connector
- Clear CMOS Jumper
- 1 x TPM connector
 
Back Panel I/O Ports
- 1 x PS/2 Keyboard
- 1 x PS/2 Mouse
- 1 x Parallel port
- 1 x Serial port
- 1 x VGA port
- 4 x USB 2.0
- 1 x RJ45 LAN Jack
- 1 x 3 in 1 audio jack
 
Dimension
• 24.4cm(L) x 20.5cm(W) Micro-ATX Form Factor

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if  installed  driver not complete.