ECS A885GM-M2 (V1.0) VIA HD Audio Driver

CPU
- Socket AM3 socket for AMD Phenom II processors
- High-performance HyperTransport 3.0 CPU Interface

CHIPSET
- AMD 880G & AMD SB850
- North Bridge: AMD 880G
- South Bridge: AMD SB850

GRAPHICS
- On Chip(AMD 880G-based with ATI Radeon HD4250 graphics )
- Integrated DirectX10.1 graphics processor
- Share Memory: Maximum up to 512MB
- AMD SidePort Memory : DDR3-1333 (64Mx16=128MB)

MEMORY
- Dual-channel DDR3 memory architecture
- 2 x 240-pin DDR3 DIMM socket support up to 16 GB
- Support DDR3 1333/1066 SDRAM

EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot
- 2 x PCI Express x1 slots
- 1 x PCI slot

STORAGE
- Support by AMD SB850
- 5 x Serial ATAIII 6.0Gb/s devices
- 1 x eSATA
- RAID0, RAID1, RAID5, RAID 10 configuration

AUDIO
- VIA VT1705 6-channel audio CODEC
- Compliant with HD audio specification

LAN
- RealTek 8111EL Gigabit Fast Ethernet NIC

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x HDMI Port
- 1 x RJ45 LAN connector
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 1 x eSATA
- 8 x USB 2.0 ports

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x 4-pin CPU_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x Clear CMOS header
- 1 x Serial port header
- 5 x Serial ATAIII 6Gb/s connectors
- 3 x USB 2.0 headers support additional 6 USB ports

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- F11 hot key for boot up devices option
- Support over-clocking
- Support eJIFFY
- Support Page Up clear CMOS Hotkey
- Supports ACPI revision 3.0 specification

FORM FACTOR
- Micro-ATX Size, 244mm*210mm

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.