ECS GF8100VM-M5 (V1.0) VIA HD Audio Driver

CPU - AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor - Support 95W Phenom II X6 processors - High-performance HyperTransport 3.0 CPU Interface - Support transfer rate up to 5200 mega-transfers per second Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU. - AM3 Ready CHIPSET - NVIDIA GeForce 8 Series GRAPHICS - On Chip ( NVIDIA GeForce8100 based with 2D/3D graphic engine) - Integrated DirectX 10 graphics processor - Share Memory: Maximum up to 512MB MEMORY - Dual-channel DDR2 1066 memory architecture - 2 x 240-pin DDR2 DIMM socket support up to 16 GB - Support DDR2 1066/800/667/533/400 DDR2 SDRAM EXPANSION SLOT - 1 x PCI Express x16 Gen2.0 slot (Support Hybrid SLI) - 2 x PCI Express X 1 Gen1.1 slot - 1 x PCI slot STORAGE - Support by NVIDIA MCP78V • 2 x Ultra DMA133/100/66 devices • 6 x Serial ATA 3.0Gb/s devices - RAID0, RAID1, RAID0+1, RAID5 configuration AUDIO - VIA VT1708B - Compliant with 6ch HD audio specification LAN - Realtek RTL8201N 10/100 PHY REAR PANEL I/O - 1 x PS/2 keyboard & PS/2 mouse connectors - 1 x VGA port - 1 x COM Port - 4 x USB ports - 1 x Ethernet Port - 1 x Audio port (Line-in, Line-out, Mic-in) INTERNAL I/O CONNECTORS & HEADERS - 1 x 24-pin ATX Power Supply connector - 1 x 4-pin 12V Connector - 1 x 4pin CPU_FAN connectors - 1 x IDE connector - 1 x 3-pin SYS_FAN connector - 1 x FDD connector - 1 x LPT header - 6 x Serial ATA 3Gb/s connectors - (SATA5 & 6 only can work under AHCI or RAID mode due to NVIDIA chipset limitation) - 1 x Speaker header - 1 x Front panel switch/LED header - 1 x Front panel audio header - 1 x SPDIF out header - 1x CD in header - 4 x USB headers - 1 x CLR COMS SYSTEM BIOS - AMI BIOS with 8Mb SPI Flash ROM - Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI - Supports ACPI 3.0 revision FORM FACTOR - MATX Size, 244mm*214mm Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.