ECS H67H2-A3 (V1.0) Realtek LAN Driver 5.764.702.2010

CPU - LGA1155 socket for new 2nd Generation Intel Core/Pentium/Celeron Processors CHIPSET - Intel H67 Express Chipset MEMORY - Dual-channel DDR3 memory architecture - 4 x 240-pin DDR3 DIMM socket support up to 32GB* - Support DDR3 1333/1066 SDRAM EXPANSION SLOT - 2 x PCI Express Gen 2.0 x16 slots - 1 x PCI Express x1 slot - 2 x PCI slots - *The second PCIEX16 only support bandwidth x4 STORAGE - Support by Intel H67 • 4 x Serial ATA 3.0Gb/s devices • 2 x Serial ATA 6.0Gb/s devices AUDIO - Realtek ALC892 8-Ch High Definition audio CODEC - Compliant with HD audio specification LAN - Realtek 8111E 10/100/1000 Fast Ethernet Controller REAR PANEL I/O - 1 x PS/2 keyboard/mouse combo port - 1 x RJ45 LAN connector - 1 x Audio port (Line-in, Line-out, Mic-in) - 1 x Clear_CMOS button - 8 x USB 2.0 ports INTERNAL I/O CONNECTORS & HEADERS - 1 x 24-pin ATX Power Supply connector - 1 x 8-pin ATX 12V Power Connector - 1 x 4pin CPU_FAN connectors - 1 x 3-pin PWR_FAN connector - 1 x 3-pin SYS_FAN connector - 1 x Reset button - 1 x Speaker header - 1 x Front panel switch/LED header - 1 x Front panel audio header - 1 x SPDIF out header - 1 x Clear CMOS header - 1 x Serial port header - 1X Power on LED (Green light) - 1X Stand by LED (Red Light) - 4 x SATA 3Gb/s connectors - 2 x SATA 6Gb/s connectors - 3 x USB 2.0 headers support additional 6 USB ports - 1 X EZ charger SYSTEM BIOS - AMI BIOS with 32MB SPI ROM - Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot - Supports ACPI & DMI - Audio, LAN, can be disabled in BIOS - F7 hot key for boot up devices option - Support eJIFFY - Support eBLU - Support eDLU - Support eSF - Support Page Up clear CMOS Hotkey - Supports ACPI revision 3.0 specification - Support ECS M.I.B III Utility - CPU voltage adjustable FORM FACTOR - ATX Size, 244mm*210mm Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.