ECS NFORCE9M-A (V1.0) IDT HD Audio Driver

CPU
- AMD PhenomII / Phenom processor (Socket AM2+)
- AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
- High-performance HyperTransport 3.0 CPU Interface
- Support transfer rate up to 5200 mega-transfers per second
- Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
- AM3 Ready

CHIPSET
- NVIDIA GeForce 8 Series

GRAPHICS
- Support NVIDIA GeForce Boost for improved gaming performance with NVIDIA GPU

MEMORY
- Dual-channel DDR2 1066 memory architecture
- 4 x 240-pin DDR2 DIMM socket support up to 32GB*
- Support DDR2 1066/800/667/533/400 DDR2 SDRAM *
- * (Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 8GB)
- *(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)

EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot (Support Hybrid SLI)
- 2 x PCI Express X 1 Gen1.1 slot
- 3 x PCI slots

STORAGE
- Support by NVIDIA GeForce8100
- 2 x Ultra DMA133/100/66 devices
- 5 x Serial ATA 3.0Gb/s devices
- RAID0, RAID1, RAID0+1, RAID5 configuration

AUDIO
- IDT 92HD202 6-channel audio ( CO-lay 92HD206)
- Compliant with 6ch HD audio specification

LAN
- Realtek RTL8111 Gigabit Fast Ethernet Controller (Co-lay RTL8101E)

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 6 x USB ports
- 1 x Ethernet Port
- 1 x Audio port (Line-in, Line-out, Mic-in)

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin SYS_FAN connector
- 1 x IDE connector
- 1 x FDD connector
- 5 x Serial ATA connectors
- (SATA4 & 5 only can work under AHCI or RAID mode due to NVIDIA chipset limitation)
- 1 x Speaker header
- 1 x Front panel audio header
- 1 x Front panel switch/LED header
- 1 x SPDIF out header
- 1 x CLR COMS
- 1 x IR header
- 1x CD in header
- 1 x COM1 header
- 3 x USB headers

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI
- Supports ACPI 3.0 revision

FORM FACTOR
- ATX Size, 305mm*220mm


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.