Gigabyte GA-M68M-S2P (rev. 2.3) NVIDIA VGA Driver 15.56

CPU&nbsp;&nbsp;&nbsp;&nbsp;<br>1. Support for AM3/AM2+/AM2 processors: AMD Phenom II processor/ AMD Phenom processor/AMD Athlon II processor/ AMD Athlon processor/AMD Sempron processor<br><br>Hyper Transport Bus&nbsp;&nbsp;&nbsp;&nbsp;<br>1. 2000 MT/s<br><br>Chipset&nbsp;&nbsp;&nbsp;&nbsp;<br>1. NVIDIA GeForce 7025/nForce 630a chipset<br><br>Memory&nbsp;&nbsp;&nbsp;&nbsp;<br>1. 2 x 1.8V DDR2 DIMM sockets supporting up to 8GB of system memory<br>2. Dual channel memory architecture<br>3. Support for DDR2 1066/800/667 MHz memory modules<br><br>Audio<br>1. Realtek ALC888B codec<br>2. High Definition Audio<br>3. 2/4/5.1/7.1-channel<br>4. Support for S/PDIF In/Out<br>5. Support for CD In<br><br>LAN<br>1. Onboard Realtek RTL8211CL (10/100/1000Mbit)<br><br>Expansion Slots&nbsp;&nbsp;&nbsp;&nbsp;<br>1. 1 x PCI Express x16 slot, running at x16<br>2. 1 x PCI Express x1 slot<br>3. 2 x PCI slots<br><br>Storage Interface<br>NVIDIA GeForce 7025/nForce 630a chipset<br>1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices<br>2. 4x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices<br>3. Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD<br><br>iTE IT8720 chip:<br>1. 1 x floppy disk drive connector supporting up to 1<br>2. floppy disk drive<br><br>USB<br>Integrated in the NVIDIA GeForce 7025/nForce 630a chipset<br>1. Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)<br><br>Internal I/O Connectors&nbsp;&nbsp;&nbsp;&nbsp;<br>1. 1 x 24-pin ATX power connector<br>2. 1 x 4-pin ATX 12V power connector<br>3. 1 x floppy connector<br>4. 1 x IDE connectors<br>5. 1 x SATA 3Gb/s connectors<br>6. 1 x CPU fan connector<br>7. 1 x system fan connector<br>8. 1 x front panel connector<br>9. 1 x front panel audio connector<br>10. 1 x CD In connector<br>11. 1 x SPDIF In/Out connector<br>12. 2 x USB 2.0/1.1 connectors for additional 4 USB 2.0/1.1 ports by cables<br>13. 1 x clearing CMOS jumper<br><br>Back Panel Connectors<br>1. 1 x PS/2 keyboard port<br>2. 1 x PS/2 mouse port<br>3. 1 x parallel port<br>4. 1 x serial port<br>5. 1 x D-Sub port<br>6. 4 x USB 2.0/1.1 ports<br>7. 1 x RJ-45 port<br>8. 3 x audio jacks (Line In / Line Out / MIC In)<br><br>I/O Controller&nbsp;&nbsp;&nbsp;&nbsp;<br>1. iTE IT8720 chip<br><br>H/W Monitoring&nbsp;&nbsp;&nbsp;&nbsp;<br>1. System voltage detection<br>2. CPU / System temperature detection<br>3. CPU / System fan speed detection<br>4. CPU / System warning temperature<br>5. CPU / System fan failure warning<br>6. CPU fan speed control<br><br>BIOS<br>1. 2 x 8 Mbit flash<br>2. Use of licensed AWARD BIOS<br>3. Support for DualBIOS<br>4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b<br><br>Unique Features&nbsp;&nbsp;&nbsp;&nbsp;<br>1. Supports @BIOS<br>2. Supports Q-Flash<br>3. Support for Xpress BIOS Rescue<br>4. Supports Download Center<br>5. Supports Xpress Install<br>6. Supports Xpress Recovery2<br>7. Supports EasyTune<br>8. Support for Auto Green<br>9. Support for On/Off Charge<br><br>Bundle Software&nbsp;&nbsp;&nbsp;&nbsp;<br>1. Norton Internet Security (OEM version)<br><br>Form Factor&nbsp;&nbsp;&nbsp;&nbsp;<br>1. Micro ATX form factor; 24.4cm x 22.5cm<br><br><br>It is highly recommended to always use the most recent driver version available.<br><br>Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.<br><br>Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.