MSI 870A Fuzion Multi-GPU Computing Driver

CPU
- 64bit AMD Phenom II X6/X4/X3/X2, Athlon II X4/X3/X2 and Sempron CPU.
Please refer to CPU Support for compatible CPU; the above description is for reference only.

Hyper Transport Bus
- HyperTransport 3.0 supporting speed up to 5200MT/s

Chipset
- AMD 770 and SB710 Chipset 
- Lucid LT24102 Chipset
- This chipset supports A-mode, N-mode and X-mode, X-mode can only work with Microsoft Windows 7 
- Supported graphic libraries
- DirectX 9
- DirectX 10
- DirectX 11
 
Main Memory
- Supports four unbuffered DIMM of 1.5 Volt DDR3 1066/1333/1600* (OC) DRAM, 16GB Max

Slots
- 2 PCI Express 2.0 slots with x16 operation (PCI Express Bus SPEC V2.0 compliant)
- 2 PCI EXpress x1 slots
- 1 PCI slot, support 3.3V/ 5V PCI bus Interface.

On-Board SATA
- SATAII controller integrated in AMD SB710 chipset
- 6 SATA II (1~6) ports by AMD SB710
- Supports storage and data transfers at up to 3Gb/s
- SATA II 1~6 support RAID 0, 1, 10 modes by AMD SB710
- SATAIII controller integrated in Marvell 88SE9128 chipset
- Up to 6Gb/s transfer speed.
- SATA7 & SATA8 support RAID 0/1 mode by Marvell 88SE9128-
MSI Reminds You...
- The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

USB 3.0
- 1 USB 3.0 port by NEC uPD720200F1

Audio
- Chipset integrated by Realtek ALC892
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
- Meet Microsoft Vista Premium spec

LAN
- Supports one PCI Express LAN 10/100/1000 Fast Ethernet by Realtek 8111E.

Internal I/O Connectors
- 1 x ATX 24-pin power connector
- 1 x ATX 8-pin 12V CPU power connector
- 6-pin VGA power connector 
- CPU x 1 / System x 2 FAN connectors
- 1 x Front panel audio connector
- 1 x Front panel connector
- 1 x Chassis intrusion switch connector
- 3 x USB 2.0 connectors
- 1 x USB 3.0 connector
- 6 x Serial ATAII connectors
- 2 x Serial ATAIII connectors
- 1 x IEEE1394 connector support additional 1 port
- 1 x OC Genie Button
- 1 x Clear CMOS jumper 
- 1 x SPDIF-out  connector
- 1 x TPM module connector
- 1 x Serial port connector

Back Panel I/O Ports
- 1 x PS/2 Keyboard port
- 1 x PS/2 Mouse port
- 1 x Claer CMOS button
- 1 x Coaxial SPDIF-out
- 1 x Optical SPDIF-out
- 1 x IEEE1394 port 
- 1 x RJ45 LAN Jack
- 6 x USB 2.0 ports
- 1 x USB 3.0 ports (blue)
- 1 x 6 in 1 audio jack 

Dimension
- 30.5cm(L) x 22.5cm(W) ATX Form Factor 

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.