EnGenius EOA7530 Access Point Firmware 1.1.18

802.11a/b/g Outdoor Dual Radio Concurrent Access Point / Bridge / Repeater

HARDWARE SPECIFICATIONS:
MCU: Atheros AR7161
RF: Atheros AR5413 (Radio1) + Atheros AR5413 (Radio2)
Memory: 64MB SDRAM
Flash: 8MB
Physical Interface:
One 10/100 Fast Ethernet RJ-45
One Reset Button
LED's Status:
Power (Status)
LAN (10/100Mbps)
WLAN1 802.11a (Wireless Activity)
WLAN2 802.11b/g (Wireless Activity)
Power Requirements:
Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design
Power Adapter: 48V / 0.375A DC
Regulation Certifications: FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17, EN60950

RF SPECIFICATIONS:
Frequency Band:
802.11a: 5.15~5.35GHz, 5.47~5.725GHz, 5.725~5.825GHz
802.11b/g: 2.400~2.484GHz (Programmable for different country regulations)
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK
Operation Channels:
802.11a: 20 for North America (5.15~5.35GHz, 5.725~5.825GHz)
802.11b/g: 11 for North America (2.400~2.484GHz)
Receive Sensitivity (Typical):
IEEE 802.11a
-92dBm @ 6Mbps
-73dBm @ 54Mbps
IEEE 802.11g
-94dBm @ 6Mbps
-74dBm @ 54Mbp
IEEE 802.11b
-97dBm @ 1Mbps
-92dBm @ 11Mbps
Available Transmit Power (Average):
Radio1 (WLAN1):
IEEE 802.11a
28dBm @ 6~24Mbps
26dBm @ 36Mbps
24dBm @ 48Mbps
22dBm @ 54Mbps
Radio2 (WLAN2):
IEEE 802.11g
28dBm @ 6~24Mbps
26dBm @ 36Mbps
25dBm @ 48Mbps
24dBm @ 54Mbps
IEEE 802.11b
29dBm @ 1~11Mbps
Antenna: Detachable Omni Antenna x2; N-Type Female; Peak Gain 5dBi

SOFTWARE FEATURES:
Topology: Infrastructure
Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11a (5GHz) / 802.11b/g (2.4GHz)
Operation Mode:
Access Point (Radio1) - Access Point (Radio2)
Access Point (Radio1) - Client Bridge (Radio2)
Client Bridge (Radio1) - Access Point (Radio2)
Access Point (Radio1) - Client Router (Radio2)
Client Router (Radio1) - Access Point (Radio2)
Dual-Band Client Bridge
Dual-Band Client Router
LAN: DHCP Server (Access Point mode) / DHCP Client (Client Bridge & Client Router mode)
Wireless:
Auto Channel Selection (Setting varies by Regular Domains)
Transmission Rate:
802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11b: 11, 5.5, 2, 1 Mbps
Distance Control (ACK Timeout)
Bandwidth Selection
Multiple SSID with 802.1q VLAN Tagging (Up to 4)(Access Point mode)
WDS AP / WDS Bridge
Security:
802.11i (WPA, WPA2)
802.1x (EAP-TLS/TTLS)
802.1x Supplicant Support (Client Bridge mode)
Encryption: Open, WEP-64/128, TKIP, AES
MAC Address Filtering / Hide SSID / User isolation / NAT in Client Router mode
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP) / Telnet
Firmware Upgrade: Upgrade Firmware via Web Browser; Keep Latest Setting When Firmware Upgrade
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Statistic and Event Log
MIB: MIB I, MIB II(RFC1213) and Private MIB
SNMP: V1 , V2c
Backup & Resotre: Settings via Web

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F)
Humidity (Non-Condensing): 0%~95% Typical
Dimensions: Length 10.24” (260mm) x Width 6.89” (175mm) x Height 2.56” (65mm)
Weight: 1.49lb. (680g)

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.